If anyone has any scrap GR or FR drums. Im in search for the plate with the actuator magnet located at the back of the drum or the entire clamp plate assembly.
Type: Posts; User: austinlonz
If anyone has any scrap GR or FR drums. Im in search for the plate with the actuator magnet located at the back of the drum or the entire clamp plate assembly.
THANK YOU!!! Finally working again the hook had burs and was bent to close together.
Your right the gold hook isn't going down all the way on the side that's not burning! How do I fix this? Thanks !
After countless hours and a lot of masters this is as close as I can get. Am I doing something wrong?35507
Update fixed the drum rotation problem. I used the wrong size screw to adjust the loading pulse motor and it somehow was getting in the way of things with the rotation. Now I'm able to see a change...
I pressed the solenoid and the hooks don't get hung up and look to be in good condition. When I press the green button to set drum in home position it gets stuck upside down and T1 error pops up. I...
The drum works properly in another machine so I'll assume theres something wrong with the master removal hooks. Would the machine still make a master if I remove the hooks and just take off the...
Each time I make an adjustment the drum gets stuck and the machine gets out of time. After I remove the drum and put it back in time and make the adjustment it just get stuck and out of time again.
probably easier to just empty out the black ink tubes and wash them out and then transfer color ink in them.
How-to: Transfer Ink from one tube to another | stencil.wiki
Here is a picture of the test pattern with the master crumpling
.35064
Checked both and the tension seemed fine. Here is a video of what's going on.
https://youtu.be/P2YRi_Lzkd4
Machine stopped burning images on master. I located the issue to be happening during the master feed. The master starts feeding weird and during the burning the master starts crumpling and getting...
So far Ive replaced the stripper pad,checked the timing cam, and cleaned the paper feed clutch. The tires seem to be in decent shape so I don't think they need to be replaced. The paper usually gets...
So far I have replaced the stripper pad, checked the timing cam,have played with paper feed clutch timing, and upper limit sensor and nothing has fixed the issue. The paper usually gets stuck halfway...
I recently just purchased a risograph TR1510 an error saying a jam in the master roll area keeps appearing. When i look in and check the master is just barely poking out the on the side the master...