Sorry for the late reply. I already solved it by replacing transfer high voltage pcb underneath the ETB. Thank you so much for quick response.
Type: Posts; User: tamboknon
Sorry for the late reply. I already solved it by replacing transfer high voltage pcb underneath the ETB. Thank you so much for quick response.
Dear All,
I experiencing this problem with a new machine Adv6555 only installed a month ago and have a meter reading of 10k only both printing and copy problem. I already isolated developing assy,...
Hi boss, it is aligned and doing good contact with the chip. I tried to put tape to the chip if there is changes. Still check toner cartridge. Thanks in advance
I will check boss. Thank you
Hi Sir,
Good day!
I have this problem check toner cartridge in Fax L410. I already change new cartridge to test. Checked the main drive alighnment. But still problem occurred. Anybody had ...
Sir, format your HDD and install new firmware or try to get a new HDD and install new firmware.
Sir, try the test print in service mode if the output is same as your sample copy the drum and fuser is the problem.... If the test print is good the CIS or the flat cable would be the problem.
Sir, Its not photocopy and regarding with the page I just scan the other page sorry about that if you've been confuse. Anybody encounter it and can help in my problem. Its good Sir sandmanmac when I...
Hi Sir, has anybody encounter this error 0x97. Please help... Thanks in advance
Hi Sir, has anybody encountered this problem? When Im printing back to back the second page shows different printout in the header only. Thanks in advance
Thank you so much Sir...
Good day Sir, Can anybody have a service manual for Canon Inner Finisher - F1 for Adv2230 and encounter this Error E520? TIA
Sir, any body can help me provide the service manual and parts catalog. Thank you so much.. All the best
Sir, I replaced the whole fixing ass'y and also do the force stop before entering the fixing and while in the fixing assy to determine but the problem is not there. The machine has a finisher unit...
Hi Sir, anybody can give me a concrete solution. Thank you
Hi Sir, I'm working this machine IR2230 I already replaced the whole fixing assy still the output copy is dirty. Cleaned the paper path and try to jammed the machine to determine where the problem...
Sir, It's in the drum/toner cartridge ghosted image appeared but I already replaced it with other ctg. I will try to replace it for the 3rd time. TIA
It's a genuine drum/toner cartridge sir. TIA
Sir,I already do that replace the drum/toner cartridge. TIA
Good day Sir, Im working with this printer I already replaced Fuser Assy, isolate drum cartridge, cleaned transfer roller and check all the ground contact. Anybody have encountered this problem....
Good day Sir, I'm working with this unit I replaced the Lever Lock right Slide and after that E015 occurred. I think the timing of the gears in the main drive causes this error. Anybody have an...
Good day Sir, Please help anybody has this service manual. TIA
Thank you for the reply Sir, so the noise coming from the machine is not related to the error display in the panel. This is also my first time to work on this printer. I will start troubleshooting...
Good day Sir, Im working with this printer Hp color laserjet cp4525 error occurred and noisy in the back part of the printer. I'm still cannot figure out where the noise came from. Any body...
Any answer yet Sir? TIA