Machine doesn't enter in to SP mode at all, done factory reset also, 806182 + C doesn't work at all.
Please suggest, Regards
Type: Posts; User: AjitN
Machine doesn't enter in to SP mode at all, done factory reset also, 806182 + C doesn't work at all.
Please suggest, Regards
I got few rebuild MPC machines 6003/3503/3504/6004.
In this machines printer option is not available at all.
Even if I go to ACC screen only copy option is displayed.
Any setting required in SP...
Team
Thank you all for your suggestions & support. I will Try that all & get back to you.
I am very much comfortable on Xerox & Konica Minolta color MFPs. For Ricoh I have some experience on...
Team.
We got few old & used C 6004 machines from one of our supplier.
Some machines do not boot up to Ready, only startup screen with Ricoh text. no further initialization of components.
Two...
Friends
I have two problems in WC7545 machines. Machines are 110V
First -
Job in the print queue was showing processing and could not get deleted even after rebooting the machine.
Loaded...
How about reloading firmware.
All
I want to increase the fuser temperature in WC 7535.
Customer want to use some special papers for which temperature must be higher than normal.
Can somebody help & tell me which NVM...
All
This is for MP C2004. I am bit confused regarding fuser temperature adjustment.
I want to the reduce fuser temperature to meet customer's requirement (for some special paper).
I do not...
YES this is a very nice explanation, it makes sense. Timing between two feeds can be controlled easily. But paper output from exit assy. shows difference in the speed. Low speed machine throws out...
[QUOTE=Caffeine;741996]Very common, unfortunately.
Thank you for your quick response.
These transparencies are working OK with Ricoh MPC 2011.
Is it possible that this media will work better...
Team
I have problem of poor toner fixing on transparencies when printed on WC 7545.
Settings are Tray 5 manual bypass with paper type transparency.
If I move the fingers over prints OR lightly...
Team
This problem is resolved by replacing HVP_TTS and loose connection at CN 802.
Thank you everyone for those suggestions & Support.
[QUOTE=Synaux;716844]Very true...try wedging a folded up bidness card between the K IU latch (if mod is not available).
I agree with Synaux about latching K unit firmly.
Please also check that...
It it like ghost image. If it is, it is mostly due to humidity, drum, charging & discharging process (high charge on drum OR low discharging power).
In case of alignment in back to back, what is the...
Something same happened with me once, One engineer put longer screw in side cover. So lamp carriage was just able to touch home sensor , due to which machine was giving intermittent home sensor...
[QUOTE=fshead;716988]442 is not fuser related...ITB related
Sir
Thank you for your quick response & extremely sorry for my mistake.
It is not SC 442-02 it is 542-02 - "Thermopile (Center) does...
Team
I need thermopile unit for MPC 2004.
Machine is giving error code 442-02
Has anybody replaced it? Is it available somewhere, here we are getting only complete fuser assembly
Regards &...
I think it would be a better idea if you try to salvage old pcdu.
Try replacing onlu PCU or even charge roll either from old PCDU or new one. Mostly excessive charge on drum which will attract more...
[QUOTE=slimslob;715910]I have seen this with Production model where the toner is being depleted faster than the machine can compensate for. With them the cure was to increase the frequency of normal...
Team
Thank you for your suggestions & Support.
If you allow me let me explain case study in more details -
Customer is at about 7 hrs drive and just logged complained about faint bands. Visited...
Sir
Machine has done only 30K prints. Machine faced sleeve problem once couple of months back. Otherwise there was no problem at all.
Please try to understand what I am saying -
Definitely life of...
Sir
I do agree with you. As I said counters on PM scheduled are important, but even over, much over life parts can start giving same patterned bands in all colors together?
I am going to try ITB...
Sir
I fully agree with you.
My only point was thread started with network card, which got repaired subsequently.
We can talked on different aspects of repairing / configuring of Network Card and...
Sir
I agree with you but try to understand that no machine with any counters on PCDU OR ITB OR Fixing will suddenly start giving such typical same problem in all colors , with such equi-distance...
Friends - where we are heading from technical issue. we all are expected to contribute / suggest on specific technical problems, are't we?