Your ir2545 replacements, how manu counts til you change them films?
Type: Posts; User: sittingpretty
Your ir2545 replacements, how manu counts til you change them films?
...and an ill fitted maintenance workflow and habit if I may add
I may have to suggest a higher capacity machine for them. They are starting to up their copy volume. These models might be too small. Thank you.
I could not agree more.
exactly the same dilemma
I completely agree on the math and practicality of your suggestion but the scarcity of parts is involved here. There are not much suppliers in our part of the city and the 30$ here is 4x the cost...
I have noticed in using the correct thickness of corona wire makes clear copies. For eg. 60 microns results in blacker, clearer copies as compared to 80 microns (based from services) IRA 6055/6255...
Tried these two models - IR 2530 and IR 2545. Have noticed right after the original fuser film have worn out and replaced them with compatible ones, their life span shortened greatly in comparison...
Guys for this threads finality I got my 315-500 fixed after 11 days of troubleshooting. Particularly on one Canon circular about this error from a C machine I stumbled upon this issue to focus on the...
i had done this already... i am zeroing in on PCB 2 as of now ( have noticed how the heat sink above the chip below the memory has almost detached, i tried to redo the thermal compound on this and...
Boots normally no error whatsoever then copy a 1 page docu it works on the platten glass and makes a print immediately without flaw. 1 copy spits the print perfectly.
But then when doing a copy in...
one of my machine has a mirroring kit, can i use this to make a copy?
Once I have downloaded it in CDS can I access the files in SST and do the update there? TY
I have an identical machine with defective HDD, no format firmware installed on SST. Need them both copier working to finish a project. Was just looking for another option to get them working.
This is in service mode, yes? Connecting the machine via network I can opt to update firmware. With the SST I can obtain a copy with my service pc running the SST. Can I opt to backup my old firmware...
Is there a possibility to extract the firmware data from a working IR6255i machine to enable me to use SST to format another hdd for another machine? Ty in advance.
Those of you who might encounter this in the future, might want to check the pre exposure lamp area for adhesives and foreign elements, found the culprit inside that area. Thoroughly cleaned that...
This is how it looks.
This black wiggly line keeps appearing on my copies be it in service mode tests and in platen glass copy. Drum blade checked, developer checked, drum claw new, primary and secondary wires checked,...
Thanks for the advice. Got it.
am willing to purchase it if possible. I am reviving a 2yo reliable printer of mine.
Service manual and Adjustment Program for Epson l120 please. TY in advance.
I have a standby identical machine, I can do some swapping of parts to ease the troubleshoot. Where would you advice I start first sir. The HVT, the maincontroller, reader controller etc. ty in...
Lamp does not come on when switched on. No initialization or startup blinks.
Upon starting the machine, the status bar takes some time to be filled then afterwards this error appears.
Noticed one thing though, while in service *28* mode usually there are two entries on the...