is 711-323 so sorry
Type: Posts; User: johnner66
is 711-323 so sorry
this happen after replace the printer kit。。。thanks。。。。
it show a3 count only
how about the internal print
mike try to reset the iot first then do the colour registration
just buy the chip itself will cost you 9us
which bearing you change here seen no have the problem
the mirror 3rd is out of position
out there who knows this fault code 711-332 thanks
it can use up 230g mike be can think of 7535 it can take up 280 g paper on bypass tray ...
try this 744-003 reset to 0
you have to reset the nvm to new
is deu to heater unit problem can try 744-003/744-004 make sure is 0
how about the exposure lamp is this light and is this move 2 time then go to home if no then is the ccd problem good luck
try change the dc psu 3.5v and 5v dc power supply good luck
having error code 711-323 any ideal thanks
that is cause by the laser unit try on the connector that the pin on laser unit is ok then connect again and try g/l
on copier behind there is a clutch that rotact the roller try check the clutch here we do it it work goodluck
you are welcome may i know where you from and what copier you working as
this is cause by the toner chip is for different country use where you got this copier and the toner from where it have to be same g/luck
this can cause by the harddisk problem try to change the h/d 10/20g any will do oh can try take out the h/d g/luck
how about you set the company email to the copier and the mail server set the ip address to copier and try
can try 700-164
you can change only the megenta motor take out have a look some time is deu to the motor out of position g/luck
you have to go remote ui to set the dns then key in the mail server to the ip photocal there