Got a MX m550 on trade a few months ago and fired it up first time today. Paper crinkles severely as leaving drum area every time. All the rollers are clean, springs for gates all in place,...
Type: Posts; User: copierpro
Got a MX m550 on trade a few months ago and fired it up first time today. Paper crinkles severely as leaving drum area every time. All the rollers are clean, springs for gates all in place,...
Yes, 413703 is the internal print controller for the Ricoh MP w2400. It is a PCB that slides into the rear of machine into a female socket on the VDB board already there. With that 413703 card is the...
Got a used Ricoh 413703 print board for a Ricoh MP w2400 wide format?
Ok, thanks. I was just wondering because they have B125 5246 PCB MCU -NP - CHN for China which is completely different and the other two were just off by a single digit so I trhought maybe they were...
Got a client in Europe needs a main board and I see in the B125 PC there are two different part numbers for North America and European Union. They look identical. Are they the same but just have a...
Got a Ricoh 480w wide format printer? Could consider a 470w.
Looking for a used straight Ricoh 480w w/rw480 prefer with 4-roll cap we can use as a loaner in our shop.
We pay cash will pick up will call anywhere U.S.
I sw on the KM web site they go up to 10.6, as I recall, for download drivers section. Will that drice a c4035e engine or is there a workaround? Account desktops are running Max X OS 10.9.
Thanks...
Now a service provider out of state is telling our account they need a drum (it is scored), new dv (developer) x 2, new charge corona, new PlotBase software, new drum blade.
The meter being 36K...
The image issue is with print and copy will have account look at lever to see if it turned over it was set to left for transport.
got in a 240w on trade and made about 100 prints great quality all of a sudden shadow of image in a band and gray background whole document. Cleaned ID sensor, drum blade wipe with folded paper, no...
Have an Ikon Fiery S450-08 was working yesterday; today it gets to Windows logo at boot up with moving crawler at bottom which just continues to cycle and does not go to log on screen.
Guess I...
I rechecked it. That's why I had it off to begin with.
In any event up and running bad HDD. Thanks for all your help.
we are not a KM dealer - any suggestions on where I can get latest system firmware? I assume load onto sim card and a service mode u code corresponding for upload and execute?
thanks for the advice - I already came to conclusion it is probably bad hdd since hdd format in service mode would not complete.
don't have a PC that will take the 40 though; I ordered a new print...
thanks for the help. I know all is straight under the control panel - I looked at all with a fine tooth comb before reseating paying particular attention to the connectors.
Since I cannot get any...
don't know much about the KM line we are Xerox (mostly) here.
The number 1 on panel was sticking some crap down in there so I took control panel off. Button works fine now though, as written, the control buttons are dead.
Did the format to erase previous...
Rescheduled the delivery. Don't know what happened but yesterday machine working perfect - firmware sys 2JD_3000.003.005 engine 2JD_1000.009.001 - did a format hdd and now it won't print - print...
I am wondering if this HDD is fried? Just sent a print job and print light blinks but nothing else happens.
Got in a c4035e trade-in a few weeks ago and now it is sold. So, before delivery to customer I did a U024 format HDD last night before I left to clear HDD of previous user's docs. Takes awhile so I...
I have a cleaning blade I can sell it for $150.00 used but lightly-used came out of w2400 w/2100 sq. feet on meter.
well, I got paper jam count "1" (paper present) at fuser exit leading edge 7504-071 but there is not a thing there.
I guess the photo reflective fusing exit sensor is shot? Might be why my...
Here in shop today will have a look. One thing my partner here did was clear all memory - w/o the smc printout. Not good. However, considering the copy q not an issue just had to reenter table type,...
Got the machine going today - put in new thermostats and new thermistor. Also, another guy here had inserted the "paper feed sensor" from a MP 2400w whereas the 240w uses a "photo reflection sensor" ...