I am working on a 5528A and the usual passwords of #1048# and 123456 do not get me into service mode. Is there another on? It's not in the service manual
Type: Posts; User: bcopier2815
I am working on a 5528A and the usual passwords of #1048# and 123456 do not get me into service mode. Is there another on? It's not in the service manual
I have been staring at the parts manual and can't seem to find the part numbers for the rollers for LCT- The large tray on the bottom. It looks like Toshiba calls it Tandem tray? I'm more of a...
I have an 8295 that gets intermittent jam code 0111. The service manual mentions 0111 DELAY Fixing Outlet Sensor PS52. I have replaced the sensor and it did not help. Anyone come across this error?...
I have a Toshiba 5506AC that has large dark bands as per the attached image. Yes, I do have the manual but I don't see anything that explains this. Long time Kyocera/Ricoh tech and I have never come...
So they work in the faster 4550's?
asking for a friend
already tried sim 2 , 21 , 24 still the same
48966This is what prints in reports. If I do turn on eco mode, the prints IMPROVE!
489634896448964
Replaced ID sensor, HV PCB, Drum unit, dev unit
We have a 4501i that makes perfect copies. Prints and status pages are very light and washed out. Eco mode actually improves the prints. Any Ideas?
Thanks
Thanks, I think I might have the solution. Its an MR3022 df and it looks like there is a Adjustment of Copy Ratio that may do the trick when I go back
Mike
Key in [357] *1 / [3042] *2 and then...
I am working on a OKI CX3535 (Toshiba rebadged)Copy off glass is perfect but when using the document feeder the image is reduced about 1/4 inch. I can't seem to find an adjustment in the manual. Any...
have a customer looking for about 40 printers, but they require an envelope feeder. They currently are using Kyocera FS-2000d and FS-4020dn but Kyocera doesn't sell envelope feeders anymore. They run...
I have a Canon IR ADV 8295 that gives intermittent HDD error E602-0111. It does reset and work for a while but I want to replace the hard drive. Does anyone know if this one is able to be cloned? I...
springs look good. In simulation transfer is at 113 per the manual. If I put meter on the terminal in the back it reads 20 volts. It also reads 20 volts with roller disconnected from the contact. HV...
Yes to dev according to manual, calibration, oem toner, LSU cleaning. Did not replace transfer, but image looked like that before we changed anything and the image on the drum is bad
I have a Sharp mx-m363 with a background issue(See attached). Problem was there before PM but have installed new drum, blade, developer, Main Charge- no help. Any Thoughts?46011
I realize this is an old post, but has anyone solved this issue?
Left machine on over the weekend and came up with 4091(000.00) code so display is good, sounds like board is bricked
I have the manual and firmware, but cannot get into service mode without a working screen so no firmware upgrade unless I am missing a magic way to do it. On the Kyocera's you just put in USB and...
I am a Kyocera Tech, but have a Konica Bizhub 4050 in one of my accounts. It has locked up the screen. I have tried reboot, unhooked from network, disconnected HDD, removed drum and toner, but no...
I have an IR Advance 8295 that reads all originals plced on glass as 11 X 17. If you use the DF, it works great. I do have the service manual but have been unable to remedy the issue. I've been a...
Thanks!!!
Can someone give me part numbers for the pickup, feed, and sep roller for a Toshiba MR-3016 doc feed?
I don't want to purchase a parts manual on this one.