I believe recent CQ 93XX's with the Connect Key controller will. Older 93XX's will not.
Type: Posts; User: RockETop
I believe recent CQ 93XX's with the Connect Key controller will. Older 93XX's will not.
Getcha a K DV drive unit too......
You are expecting way more out of this machine than it can achieve. It is a mere office color machine at best.
5675 will accept a HCSS/BM. I got two.
Yup!
Any new news?
Yup!
I had a 700 with the very same defect. Just changing the motors didn't fix it either. There was a tip to lube the gears and idlers. that was only temporary. The only fix was replacing the entire...
See above.... Try the developer DRIVE unit(s).
Try your developer drive units. I don't know this machine, but have seen it on others.
I would try a LVPS first.
I work on both. They will bring their own sets of challenges.
CQ, forget everything you know.
Nuvera, HFSI, HFSI, HFSI......
Yes, that is the cleaning blade.
Yes, the .315 amp fuse has worked.
You have sw version v3.0, v3.1 will have IOT version at 54.42.0 Upgrade to v3.1 and your problems should go away.
Describe your business. Do you archive documents? Do you ship documents long distances? There are a lot of businesses where the ColorQube is a perfect fit and many where it isn't.
Do both machines have the same FW level?
There is a service bulletin in ET's referring to this as well as some other CRU setting to extend service life.
The lever that moves the color registration shutter is broken.
What altitude are you at?
That is the End Of Life message for this machine!
Make sure that the pinch rollers in the door are putting equal pressure on the paper> are you getting 77-111 codes?
The fuser pressure roller is providing uneven pressure against the heat roller.
Nope, yep, nope!
You need a new ADU Driver board.