Thanks “Contributor” that part number is correct for the rear latch, which is what i need. The spring on the rear latch is heavier because of drive gears being at the rear. Probably why the front...
Type: Posts; User: Woody214
Thanks “Contributor” that part number is correct for the rear latch, which is what i need. The spring on the rear latch is heavier because of drive gears being at the rear. Probably why the front...
I already contacted Kyocera and they can’t find the latches either. They said they were located in the document tray unit, but they are not even close…
The latches are connected to front and rear lower frames and then cover engages once closed. Not part of the cover.
Anyone had to replace the rear or front white latch hooks which keep the DP top cover closed/latched? Can not find them in the parts manual.
Thanks Lance15, I will give that a try...
Set machine to multiple copy and machine will make one copy and then say add paper to main tray. There is plenty of paper and when you open drawer and close it you can make one more copy and it says...
HP P3010 laser printer - I replaced the fuser unit with OEM fuser and customer complains of insufficient fusing with bond paper and envelopes. Have replaced the fuser 2 times and withing 2-3 weeks...
Thanks for the reply but not familiar with ROS?
This is a Color Laser model so a bit unusual to get a print head error... Anyhow customer says it won't reset. Nothing I sold but trying to help her out. Any ideas? She said she called Lexmark and...
Would you mind sending me a part number or email me copy of the bulliten with that please?
This model has the loudest doc feeders I have heard, even when new it was loud. They will feed about any thickness document though, which is a plus i guess... Anyhow the drive gear on the ADF take up...
Kyocera/Copystar, Toshiba.
How do you reset this message on the Ricoh MP 3500? Does not appear to have a waste toner container in this machine. Appreciate your help!
Never done this before... Where do I type this in at the command center? Should I copy and paste the entire command info that you just provided, and if so where?
Thanks!
I have a trade in FS 1135 and can not sign in to the Kyocera Command Center using the default password of admin00
How can I reset this to gain access in the KyoceraCommand Center?
Thanks for the quick reply Stephen! Much appreciated...
Customer stated that orange wrench has lit up and error code SC 401-00 is displayed. Can not print to plotter... They have unplugged and repowered up but the code persists. There are no available...
Can you pull off the toner motor and take a look at the white drive coupler attached to it? Need to make sure it is not already cracked and if you could send a picture of the motor and drive coupler...
Does the paper advance at all? If it goes to the timing rollers in the turn area but won't go beyond them then check the one way bearing drive gear located on the rear side at the bottom. Burnish the...
I know this is an antique, but looking for the small white plastic drive coupler that snaps onto the toner motor drive shaft. Forgive me if this appears to be a duplicate posting as I already posted...
SOS different day on the 3010i and 6525/6530. Never saw this on FS 3140 series, as you could clean them till the cows came home and they would always look like new.
Seems to be a softer or less...
Need the small white plastic drive coupler that fastens directly onto to the toner motor shaft.
What model machine is this?
Great news!!! I do look forward to utilizing this site through my own technical contributions and the contributions of fellow technicians.
What is the Konica/Minolta feed roller part number that works for replacement?