Anyone have an install manual for the fk-517 on the bizhub c3350i? Kit some reason didn't have a manual and it seems pretty straight forward, but the one smaller plug has no place to plug in.
...
Type: Posts; User: mrfuser
Anyone have an install manual for the fk-517 on the bizhub c3350i? Kit some reason didn't have a manual and it seems pretty straight forward, but the one smaller plug has no place to plug in.
...
Anyone see the adf on c3350i not reset for next job? feed tires stay in down position. Machine has under 10k on it.
I did notice if we lift adf off glass and put it back down it will reset. odd
Thanks all! Got into service mode via trouble reset screen and did a logical format then added movie data and changed admin password and now all good!
can’t get into admin mode as it is greyed out
get to trouble reset screen and all it says is trouble reset and AES. Doesnt matter what digits i input. 9272927292729272 or 12345678 or 92729272, nothing works
Ok, client was moving the machine to a new location and reformatted the drive. Now it says to reformat or enter the encryption passkey. We can't get into service mode. Anyone know any back door...
Ok this wide format is possessed. I can go into seevice
Mode from boot up and print all test pages and works
great. Let it boot normally and gets and error code.
any thoughts? All cleaned...
Client has a fairly new c368, meter around 50k. Keeps popping up a c2552 over toned cyan developer. I can go in and do some screen shots and get it back down to normal level as and then later it...
Seemed like it
was a stuck
fax job. Format drive was only way to clear
jobs Then it started working.
Anyone know what an FB06 is? Laptop just died and I’m 20 miles from shop
bizhub c3350 machine
Client has an envelope feeder on the mp tray and suddenly started getting an error 125. Something about a motor on the mp tray. Anyone seen this? Any fixes? We don’t normally work on these and...
Does anyone have the extended memory and option for ocr for a bizhub c754?
also is this standard memory?
Does anyone happen to have an lk-105 v3 kit for a c754? This client is wanting to scan and I have tried and tried to talk them out of it and getting a different scanner to no avail.
Thanks!
...
I don’t have a previous version. Does anyone have one? Some reason site only has a new version that changes from 4 to 4e and I think that’s the issue. Anyone can send me an older 4 version?
Ok. I got it past data recovery and can make a copy off the glass but it won’t recognize the hdd or the adf. I have tried another drive and when I hit logical format in service mode it goes to 0%...
tried that, no love. Any way to downgrade FW?
Ok, last resort we are going to try to downgrade. Never had to do this before. Anyone have instructions?
Thanks
K
Can we replace the mfp and ssd from another machine together?
I have a couple of donor c754 units. Could I use an ssd board from one of them to fix this? When we ran self diagnostics it shows pattern error on ssd
Yep. I’ve done lots of updates. This one went south for some reason
Did you wait until the print button turned blue when you were updating firmware before you turned machine off?[/QUOTE]
update firmware . Seemed like the update went well and all said finished then reboot to error
QUOTE=Markks;2482662]Sounds like you have a boat anchor. Ive never had it take over 5-10 minutes tops...
Screen is stuck on "data is being processed do not turn the power off" and has been that way for hours. Any idea how long this takes?
Thanks all
K
well, you win Tech of the year award for that one! I didn’t even think about that. I really appreciate the tip.!
Must be the fuser is bad. Put it on thick paper and works perfect. Tried even raising temp and slowing speed in service mode and made no difference. Only putting it on thick paper made it work 😩
Anyone have a good used Bizhub c3350i fuser?
part number AAJRR70311
Or a source for lower cost than msrp new