Hello.
We have a Samsung K4350LX and we want to use a USB flash drive to print from and to scan to the flash drive.
Because the customer have no network in this house, he needs do do it with...
Type: Posts; User: druckerteam
Hello.
We have a Samsung K4350LX and we want to use a USB flash drive to print from and to scan to the flash drive.
Because the customer have no network in this house, he needs do do it with...
Thank you very very much!!!!!
Regards, Paul
Hello. I have two machines showing the code C-D011.
I read in this thread that it helps to update firmware:...
Good morning.
We had to change the HDD. But with another HDD we get also C-D012.
In the past a firmware upgrade fixed this issue.
So we searchig the firmware for C754e.
Regards, Paul
Afer changeing the HDD from a bizhub C754e we need a new firmware for the machine.
Could anybody send me the firmware for C754e ?
Regards, Paul
Dear Guys,
could anybody send me the manual how to calibrate (force line setting) the Ricoh MP C3004?
How do I come in the SP mode??
We have a blurred lined image.
Thank you very much!!!
Yes, you are right. I think we will do like this.
Thanks fpr the replys.
Regards, Paul
Okay.
Thanks guys.
I know that we could format it in the copier, but we need a erasing confirmation with the serial number of the hdd for our customer.
This is the point. So if there is no...
Thanks for the reply.
I think it is a different form factor.
Attached is a pic of the SSD.
49719
I think NVME looks like this? Or I am wrong??
Dear guys.
We have several Kyocera machines with integrated SSD Boards HD-6.
We have to delete the SSDs with a erasing software.
The boards have a special S-ATA port and I cant find a adapter...
We didn't transfer the wifi board because the customer want to use the printer with USB.
He doesn't use wifi.
Regards, Paul
Thanks for the answer.
I didn't find this manual. Is it possible to send me?
Regards, Paul
Dear technicians,
we changed the logical board from a Brother MFC 7860DW. Because it was defective.
Now the computer is showing the model 7040D when I plug the USB cable from printer to the...
Okay, thanks. I will try.
Regards, Paul
Dear colleagues.
We have a bizhub C284e which doesn't starts.
We changed the hdd, updated the firmware, but it comes only to two sharks, and that all.
Do you have any idea?
Maybe the SSD...
Hello.
We also need the movie data for the bizhub 654e B/W copier.
Could somebody help us?
Regards, Paul
Thank you very much!!!
If I make reset of the machine through the Webinterface, the machine resets, but the adress book and the network settings (SMTP, DNS...) did not reset.
Do anybody have an...
Dear technicians,
we got a MX-2640N.
If I print colored test pages the color yellow is 1mm on the left side, so all colored textures have a yellow shadow on the left side.
If I print/copy...
Hello.
We have a C224e which is not showing the counters for fuser, drums, and os on.
I just see the toner counters.
I know in the past there must bei a software switch to activate the...
We collect this machines from some years ago till now and have for now no solution. We didn't have the problem in between some weeks. Therefore we have 2-3 copiers.
So I will try to calibrate the...
Thanks.
The problem is also on the flatbed glas. Is it possible to calibrate the scanner in the service mode or how can I fix the skew scanner?
The problem ist not the doc feeder, I think the...
Dear Technicians.
We have 2-3 bizhubs C224e and C258 an which the scans are crooked. And also die copies.
The prints are perfect and also the scans and copies from the dual scanner in the adf if...
The problem ist the duplexer motor. It was defect.
Dear technicians,
we have some Konica C224, C454 etc. we resetet it in the Service Mode.
At some of them we have to type the Admin passwort to go into the User Settings.
In some of the copiers...
Hello.
We have a bizhub C3350 with the error 93-03.
If we want to print or copy in duplex the paper come out, but in the lower output, like we print simplex.
Normally it should come out in the...