Thanks for chart,but outside for this chart is there
Any solution for this problem,such a firmware update
Or any?
Type: Posts; User: jewen25
Thanks for chart,but outside for this chart is there
Any solution for this problem,such a firmware update
Or any?
Chk the bushing maybe getting loss
Hello sir i have same issue can you send me to my email : whyan.hbt@gmail.com
Any help for this blank copies
Test the thermostat
Maybe in the developer,just try to clean or replace
YouTube
Try this video i found in youtube
Just try to reset to default setting or factory setting
Try to chk developer unit
I guess maybe i am wrong i need the exact value To input using U425?
Hello thn for reply, but only the setting of the print is ok but if you photocopy from the platen
And DP its blank copy
Hello Sir thanks for the reply,but i allready apply sim U002 two times,but no effect,but the print its ok, only in copies are the problem
Hello
I accidentally press the u411 with out the test chart and the copies is
blank but if you try to print its fine and also apply factory reset but no lock
is there any solution for this?...
Are you using original fuser roler?
Is theres any sound? Just try to check the Gear44 beside the motor
You mean sir if change the distination the toner well not read?
Thanks.i well try this
When i replace new control panel its working,main pwb its ok, when you press its beeping, but the start button the green led light is off
Any solution for the key pad of this is notworking but when press the key it beef
Can we repair this? Because when i swap to other its working,
I update the firmware
I check all connector
I suspect maybe the pwb or the power supply board?
Its any solution for this?.
its any idea for this error in the manual said main motor problem our there any part that cause this error such as engine bord or power supply board etc..
open the left cover and clean the transfer roller using clean cloth with water,just you said its to dusty your place,and i assume that the 2 little spring are in place,just try it.i hope its help
my concerns,there many tech not authorized to repair,so i think its help to change it,if its possible
TASKALFA 1800, and EcosysM2535N