Hello, thanks for your help, here are more details. Is a pre-printed, pre-cut flyer, less than 20 lb maybe like 15lb paper weight, size 7X9 and pretty much what needs to be printed on them is a name...
Type: Posts; User: gitana1983
Hello, thanks for your help, here are more details. Is a pre-printed, pre-cut flyer, less than 20 lb maybe like 15lb paper weight, size 7X9 and pretty much what needs to be printed on them is a name...
Hello, thanks for your reply, here are more details. Is a pre-printed, pre-cut flyer and pretty much what needs to be printed on them is a name and address on it, for that reason has to be that...
Thanks for your help, large amounts is about 10,000. I have looked into specialty trays like an envelope feeder but I don't find anything similar nor in the brochure or manual. If you know if this...
Hello everyone,
Quick question, have been trying for a while to print a custom size paper (7x9) on one of the trays of a minolta bizhub c368 since is for a printing place and have a large job on...
Hello everyone,
Quick question, have been trying for a while to print a custom size paper (7x9) on one of the trays of a minolta bizhub c368 but no driver will allow me to do so. Is this even...
Quick question, I have already replaced the belt but now is the scanner which is faulty but in the manual only shows the whole assembly, how can I get part number just for the scanner?
Hello everyone, have a Sharp MX4110N that the admin password was changed from the default "admin" and can't access it. According to manual, simulation 24-30 but the machine doesn't have the 30...
Can't find a vendor that carries them, can you point me in the right direction?
I know is a little too late, Copylite has a kit that comes with both rollers and fuser claws, but is missing thermistors, if by any chance you were able to find them somewhere else, please point me...
Hello Everyone,
I already have both rollers, but can't find a place to buy the fuser thermistoer, the manual does not list any fuser parts, does anybody has been able to buy these thermistors? if...
Question,
Any idea where to get the thermistors for the MInolta Bizhub 423? I already have a kit with both rollers but need urgently the thermistors, any help will be appreciated.
Thanks
Hello Everyone,
I have been trying to purchase the manual that includes this unit but I have not been successful, does anybody can provide me with the actual part number for the Oversize high...
Hello, looking for Service and parts manual for this model, does anybody knows where can I buy it? Paul doesn't have it... any other ideas?
Do you have the service and parts manual? How can we negotiate?
Thanks a lot!!! it worked great! I'm still trying to buy the parts & service manual because now I need to replace developers so want to check if it requires calibration or not. If you can point me in...
Hello everybody!
I am in desperate need of service manual for this model, does anybody knows where i can buy it? Or meanwhile the part number for the transfer belt?
Any help is appreciated...
Hello everyone, looking for help...
Have Toshiba E Studio 351C With error code C950,
History: at the begining it had CF20, replaced auto color toner sensor and developers, now it came to the C950,...
Hello Everyone,
I have an HP Laserjet P4014N that when I turn it on it makes the noise like it's warming up but then it stays dead. We replaced the power supply board but still we are having the...
Prayers from FL, may you find the strength so much needed in the great memories.
Hello everybody!
Have a question for the Sharp specialists... on this models, the toner chip expires before the toner does, so we end up with a full useless bottle (not cost effective for rental...
Hello Everybody....
Not too familiar with Okidata and now we got this message on a Okidata MC160N, just not sure what the IC stands for... maybe cyan drum? if anybody knows for sure what this mean...
Hello to everybody...
I have a Xerox 2510 to which we replaced the developer, it worked fine for a couple of days but then black spots came in.
I currently have a service manual for this machine...
Tried that too....
I did it..... but it just didn't work. any other idea?
Heeeeeelp!!!!
Got a HP Designjet 800, I did the Paper Advance Test and it passed it all but now I can't exit the service mode. Any idea on how to do it?
Thanks in advance