This is just initialize menu reset. We don't know the password for RUI. I wanna reset the whole machine on factory default.
Type: Posts; User: apoxi
This is just initialize menu reset. We don't know the password for RUI. I wanna reset the whole machine on factory default.
Can you please tell me how to reset to factory default settings?
Hi,
We have a problem with canon ADV4525i III. When printing duplex (not every print) jamming (see the picture).
The jam code is 010755057
1.sided working BP!!!!!!!!!
The sheet of paper...
Hi Sly
Yesterday i was at the customer and i found what is the problem.
The problem it is in the drum unit (see picture)
Drum unit with the chip is the CEXV 53, without chip is CEXV 38/39....
Hei,
I have this problem too. I have ADV4525i III (3rd generation)
Jam 0107 - the fixing unit was replaced with NEW one (ORIGINAL)!!!!
The jam steel occurs.......
I have that problem. The machine has 350K printout. I must replacing the reg. drive ass. (drive is for reg. roller and Waste toner con.)
FM1-A225
Cleaning blade is the same, but the Fixing film unit and pressure roller is NOT the same!!!
In fixing unit you can change just FILM (is the same ADVC52xx series)
I have this error code. I had to replace the hooper unit.
Change this plastic-down below is broken
Code: RC1-6643-030
I had this error last week. This helped :)
I had this on C3330 series. The HDD was a problem. When i change HDD, power on machine 2+8 keys and reload firmware.
Yes, IR1730 support SMBv2/3, BUT you must install special firmware v79.90. And also support TLS.
Size detect unit FM4-6571
If the machine have postscript, try with postscript (PS) driver. It has many more color settings.
You must install Version 50.91.01
I had this problem on C3330i. The problem was in the disc. When i replace the disc the problem is solved.
Leave the right door open and try ERR-CLEAR!!! Then reboot.
You must upgrade the special firmware!!!
For ADV52XX series is special firmware v46.68.
Look pdf file. Also have special firmware for ADV50xx and C20XX
Which machine?
I had this error on IRADV6055. E001-0002 and E001-0010. I replace the fixing upper unit, pressure roller and all thermistor. After 2 days again error E001.....shit...
Then i again disassembly the...
Hello,
Customer have error on IR7105 E5B5 - 8013 (perfect binder A1).
Any advice?
Previous weekend i had this error on IR5055N. When i replace drum cleaning blade i (by accident) disconnected the pre-exposure LED.
I had this error. When i was replacing the hooper the error was gone. :)
From manual:
E025 0468 05 Title No toner detection error (Bk)
Detection
description
The state without toner was detected although the recovery
sequence was performed for 5 times after...
I had this problem (green light on, black screen). Replacing the disc resolving the problem.