Search:

Type: Posts; User: darknet93

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. [Misc] Re: Bizhub C364e Disable password authentication

    THANK YOUUU :o:o:o

    it worked !! you save me. thanks again. ;););)
  2. [Misc] Bizhub C364e Disable password authentication

    Hi , i have 1 unit C364e asking for password when i try to print out counter. also this machine asking for password when i press "utility" button and when i try access to "user setting". i know the...
  3. Replies
    7
    Views
    1,073

    [Misc] Re: MPC4504 SMB Scanning isue

    but i test it direct 1 to 1. machine direct to laptop using network cable. no other network equipment. and when i change the controller board. using the same setting it can success.
  4. Replies
    7
    Views
    1,073

    [Misc] MPC4504 SMB Scanning isue

    Hi , good day everyone. i have a weird isue regarding my mpc4504 SMB scanning.

    if i put \\pc network path\folder and key in the username and password the machine stated "connection failed check...
  5. Replies
    8
    Views
    4,918

    Re: SD card for restoration is required

    is there any other ways to fix it ? because i did not change the controller board. the machine running well before this. but after the machine has been turn OFF for more than 14 days and when i try...
  6. Replies
    8
    Views
    4,918

    Re: SD card for restoration is required

    Hi i'm facing this issue now for model Ricoh MP4054. may i know for step number 5 you said where do i get to copy the encryption key to put in the txt file ?
  7. Replies
    6
    Views
    920

    Re: iRADC 5250 can't enter service mode

    have you try the * 1&7 3&9 * service mode ? from there you can try e355* clear all ram

    53769 from here select 01 53770 then highlight the e355 clear all ram and press 2 then press OK at the...
  8. Replies
    6
    Views
    920

    Re: iRADC 5250 can't enter service mode

    Have you try to E355* CLEAR ALL RAM ? or just do Format HDD and reupdate Firmware ? normaly it will solve the problem.
  9. Replies
    8
    Views
    1,829

    [Misc] Bizhub C658 No Animation data error

    Hi good day everyone. i have this error on my Bizhub C658. it would be much appreciated if someone can sent me the movie data for this model. cuz i only have movie data for Bizhub C368 which is not...
  10. Replies
    2
    Views
    2,359

    [Misc] RICOH auto sent meter report to email.

    Good day , can someone teach me on how to setup RICOH machine auto sent meter counter to my email ?

    i do found a few step from this website here at SP mode

    Set SP5-866-110 to “1” to enable...
  11. Replies
    6
    Views
    705

    Re: Canon IR ADV400i (IP Competting error)

    yes i know if we set to dhcp the ip will change. the isue now is. i did not plug any network cable to the machine also got this error. as mention before i have face this isue before with ADVC52xx...
  12. Replies
    6
    Views
    705

    Re: Canon IR ADV400i (IP Competting error)

    Hi , thank you for your advice. but as per mention before. i did not connect any network cable to the machine. the machine was standalone. so can confirm that this error do come from machine and not...
  13. Replies
    6
    Views
    705

    Canon IR ADV400i (IP Competting error)

    Hi , im facing isue with my Canon IR ADV 400i. got message at bottom screen saying that "A Competting IP Address was found on the network" mean while i dint connect any network cable to the machine...
  14. [Misc] Re: MPC4504 Network extender card not functioning.

    Hi, just update for this case. yes i missed the step where i should set the IP Address at Web UI.

    52902 52903 52904

    thank you. now my machine can run print and scan again. :o:o:o
  15. [Misc] Re: MPC4504 Network extender card not functioning.

    hi, yes i plug the usb loop cable. yes usb port on the controller is function can print using usb. ouh the optional interface got default ip ? maybe i miss that inside service manual. will take a...
  16. [Misc] MPC4504 Network extender card not functioning.

    Hi everyone, is there any setting that i need to do to make my mpc4504 network extender card functioning ? cuz my on board network port already spoil causing by lightning strike. so on board is not...
  17. Replies
    2
    Views
    3,328

    [Misc] PCL XL Error Warning: Illegalmediasource

    Hi, how to solve this isue :confused::confused:

    """"PCL XL Error
    Warning: Illegalmediasource""""

    i got 1 customer using mpc3001 that need to do booklet on A3 paper.
    if using PCL6 can do this...
  18. [Error Code] Re: No Animation Guide Data Available on bizhub C360

    Hi.. where can i get the movie files ? or do i need the firmware ? i also got this problem on my Bizhub 363
    Thanks
  19. Replies
    8
    Views
    4,168

    Re: MP C2500 Can't Access Admnistrator

    35581
    if no login tab show at screen have u try press the login button ? as show in my picture ?
  20. Replies
    8
    Views
    4,168

    Re: MP C2500 Can't Access Admnistrator

    have you try to clear the password by getting into SP Mode (143) > Copy SP > 5846-46 ? after restart machine u press the (123) button and press login button on the panel(key logo) then login as admin...
  21. Re: Remaining data that is not needed is been cleared.

    Hi, You can go to service mode level 3 , select "COPIER" , and then "Option" and select "LCNS-OF". inside there go to page number 4/5. set the "ST-HDCR2" value to "0" instead number "1".. thats all...
  22. [Misc] Re: Canon iR ADV C50xx Fax Fowarding to Folder

    Thank You :cool::cool::cool:
  23. [Misc] Canon iR ADV C50xx Fax Fowarding to Folder

    Hi , just want to ask.. did iR ADV C50xx have a function to do Fowarding Fax to Folder inside PC ? from what i know Ricoh machine can do this..so i would like to know if this model can do the same...
  24. Canon iR ADV 4245 Not Showing "Free Size" setting

    Hi my Canon iR ADV 4245 Not Showing "Free Size" setting in "Registering Multi-Purpose Tray Defaults".

    do i need to get into service mode and change something ? :confused:
  25. [Misc] Re: No "Print Volume Use Limitation" on Ricoh 5000

    sory but i din't understand what u said. :confused: do i need to turn on the function inside service mode ?
    because right now my machine din't show the "print volume use limitation unit count...
Results 1 to 25 of 68
Page 1 of 3 1 2 3