have you set scanning to port 443 ?
Type: Posts; User: Morlock49
have you set scanning to port 443 ?
so what did you do to resolve the problem
put on the special SSd Firmware. this will check the SSD pwb and tell you if the SSD memory is ok,
if faulty new SSD pwb required.
If good then install firmware ver C8
your m/c is about 4...
Since I have been doing the latest SSD fix and firmware, I have been getting weird results as well. most of the time I have had to unset the hard drive, cycle the m/c power, and then reset the hard...
Exposure lamp error
When input value at the time of exposure lamp illumination does not exceed the threshold value between 5 s
Possible causes
Defective connector cable or poor contact in the...
thanks for you repies. I will check the machine settings and let you know
I have a problem with Mac's running O/S 10.7 printing to Bizhib C650 and Bizhub C451. When the customer goes to print one set or print, the copier will try to print 9999 sets or 9999 single pages. ...
whats with the abuse, if the guy is not a dealer and needs the movie data then he should get it from a reputable dealer who can install it for him, or like you are telling him to do, buy it from...
so where do politicians fit in this scheme of things?
I thought it was a Copier Company's standard practise that the tech knew all about the customers software, how to use it in the greatest detail, and then show the customer how to use it. What else...
when I worked for a konica minolta dealer I found that Hytec were more expensive than repaired boards from konica minolta
can I add one other copier to the list of bad design. a konica minolta c10. it took me 3 days to change an internal gear ($1.00 part cost). I now refuse to work on these piles of garbage.
what version of mac o/s are they using. also what program are they using for making the document. I have had issues where some customers were using mac os9.? and quark version 6 or 7. they had...
As far as i can remember the cf 2002/ cf3102 has no windows 7 specific drivers. however if you use a vista driver that will work. Fiery has 2 print controllers. CN 3102e has a vista driver...
Generally only KonMin techs have access to the firmware. I would suggest you get a konicaMinolta tech to do your firmware upgrade.
What do you all think about end users (who dont want to pay for service call out) trying to fix their machines, and when they cock it up, they want free advice on how to fix it?
The company I...
do the machines have banner printing capability?
No not all the manuals are available. you can get the options, and the high end color manuals, but the 3050ci service manual is not listed
I am not sure but i believe there is a Linux PPD that you can download from Kyocera. maybe this would help
1 week, a new ricoh install in a university print room. had to babysit to make sure it did not jam. I read plenty of books and got to have regular lunch breaks, plus made bonus as on special job.
NoblE
there is no HDD on this machine so the memory must hold the scan data. from what I understand you must add the additional 1gb memory module to get full scanning capabilities. I assume you are trying...
easier still let the copier obtain an address via dhcp, use that address and see if problem persists.
down load the user manual and then goto section and pages 14-18 to 14-25. These pages describe how to make adjustments to account track. it is called ECM in the manual. try all zeros for the...
I need to ask a couple of questions
1. what software is he using to produce the brochures? ie adobe, quark, publisher?
2. is he using the latest printer driver, and which type, pcl or ps?
3, is he...