All 4 were marked 3 weeks ago so we changed them as from experience the drums never go life on these machines. When i visited today only 3 (C,Y,K) are marked along the edge. I am not sure if the Dev...
Type: Posts; User: The Guru
All 4 were marked 3 weeks ago so we changed them as from experience the drums never go life on these machines. When i visited today only 3 (C,Y,K) are marked along the edge. I am not sure if the Dev...
Hi all
Is it me or do Taskalfa 308ci's and the like eat drums? I fitted a set of drums to one 3 weeks ago and it has done 4K since and 3 of the drums have bad scratches on the edge which is...
I did have a problem like this once on an 8205 and the last resort was to format HDD and reload firmware which cured the problem
Hi
Does anybody know if the Inner Finisher H1 which fits the 55xx Gen 3 machines is the same as the Gen 1 or Gen 2 machines just with new covers on?
Thanks
Tony
Hi
I would be tempted to change the feed drive Ass'y 302MS94050
Spot on, thank you very much:cool:
Hi all
Anybody got an idea how you get into the service mode on the IR-C1325if? Its not in the manual would you believe (or I cant find it)!
Thank you
Thanks for the reply
It is only a small machine basically a 30 ppm printer with a scanner slung on top so no HDD or memory card, updated Firmware and did U021. Its intermittent so it looks like...
Hi all
Has anybody ever come across this error? Cant find it in any manuals or in Service World.
Thanks for looking