Sorry Blackcat, been manic!
Its the machine trays. All the linkages look ok.
Type: Posts; User: Phil Walling
Sorry Blackcat, been manic!
Its the machine trays. All the linkages look ok.
Morning Folks,
Hope your all good.
Something that has been baffling my brain. We have an issue with tray 2 not lifting. Everything points to the tray lift motor. Except... its not the motor....
Hmmm yeah I thought that too. My phone is on the latest OS and it works ok to a machine with the same level firmware. Really confusing.
Morning folks,
I have a wonderful issue that is baffling me.
Customer has a WC6605 that they have been printing to via Airprint with no problems. Yesterday they called us in to have a look at...
Only ever worked on Konica production boxes... so my vote is for Konica!
Afternoon All,
I appreciate I could just be being thick here or missing something.
I am struggling to set up print release for jobs sent to a Tosh 5005AC.
Ideally I want my user to login and...
Toshiba finishers are limited to 30 sets stacking before the machine stops and waits for paper to be removed from the tray. This doesn't matter if its 2 sheets stapled 30 times or 40 sheets stapled...
Thanks, gives me something else to think about... not had chance to fiddle yet today.
Afternoon again!
I'm like a bus... no posts for ages then two at once!
Anyone had a phaser 6600 throwing error 92-671? Asking for magenta toner and magenta IU. Occasionally it will print with...
Afternoon folks,
Looking for some words of wisdom.
I am currently having a headache with an FS612 finisher. The issue only occurs intermittently and only when using the tri-fold. The paper is...
Eeeek it will be 30 years in July.....
I've had this a couple of times and it has always been the Dev unit that has died.
Are you getting any code or is it just giving the toner warning?
Magnum Patrol boots, love em, most comfy boots i've ever had
Thanks for the help folks....
Oh yeah, that might help. Sorry been a long day.
Its a Toshiba 2505ac.
Afternoon folks,
Hopefully a quick one and i'm not going totally bonkers.
Anyone know how on earth I can set a specific tray that faxes print from? Have been trough 08 codes and can't see...
The one way clutches (bearings) are a known issue on this machine. Make sure they are clean and lubricated.
I have also had SC202 being caused by a bad earth from secondary transfer. Took ages to find it.
The display was working and had tried all the usual bits.... really made me scratch my head.
F010 - Main PWB checksum error Defective main PWB.
Turn the power switch off/on to restart the printer.
In recovery mode, download the controller
firmware using a...
I've the reg clutch and actuator cause problems like that on that machine.
Best fix I found was wheel the machine to the top of some stairs, make sure no one is coming up, and push.....
Just...
I've had a pacemaker for 26 years (got it when I was 20). Never had a problem working on any machines and I've been working with copiers for 29 years.
That does sound as though you have an obstruction in there somewhere, causing the paper to skew. Try getting the paper to exit onto a different tray and see if it skews there.
That sounds like you have a failed SD card on the MFP PWB (think its that board, the one the network cable plugs into).
You will need to make a backup from an existing 2310 SD card and then switch...
It is possible to buy metered and non metered toner from Xerox.
To use the metered stuff a code has to be entered into the printer at setup.
Non metered toner will work in a metered machine,...
That did the trick! The Dell driver worked perfectly. How bizarre.
Many thanks for the suggestion.