I fitted new belt and cleaner a while ago
Type: Posts; User: Babelman
I fitted new belt and cleaner a while ago
They have plenty left, but the guy before me loved playing around service mode
Hi
they happen on print jobs not copies,I was given some advice and did a SKY copy and fed blanks sheets through the ADF and was fine for a few hours and now back, sometimes its colour and...
intermittently getting these thin lines on prints on the top and sometimes the bottom, does not do it on p prints.Is worse on the thicker headed paper and is black and also can be yellow and...
Hi,
how many copies should machine set to in service mode counter? Have a machine set to 500,000 on all,this seems to high me?
Thanks for any help
Hi,
got this m,c and y drum units at 165% would this cause the toner to roller? Never come across this before as new and don't want to do a expensive repair and still got the problem.Is it...
Great tip thanks,now have E0532-0001 have read what says in service mode, just dont understand the terminology
Thanks what is the best way to do this, as I am a beginner..
Hi I am getting a jam message, indicating in internal finisher but can't see anything, I know very little about these. Before this the copies where coming where coming out crumpled and it has a new...
Hi Need to replace whole assembly but can't find the part number, would be grateful to any help..
Can't find part number, anyone know it please
FM4-9736-010, FM4-9736-000 , have found these numbers, can any tell me which is the uk (240v) one please have know parts cat. Thanks
Hi,
I have a ira 5250i, service mode has a password, I do not know. I have been told I can disable this via
firmware. But do not know how to help please.
:confused:
I updated firmware and all good, thanks the advice
I did a firmware/software upgrade and all good, thanks all for help
When I check in service mode show as PS 3A power on fault, any common problems for this or new sensor required? Jam code 0A0C Thanks for any help.
Have installed new black drum unit, on power up I get E0020-1360, when I put old unit back this does not happen. I have checked new unit and cleaned contact points, visibly it looks fine. Could it be...
what is part no for complete unit?
I tried that with level on the glass and it was level. I adjusted it so was leaning back, this worked for a few weeks.
might have to try that..
Have got this on C5045i,has anyone come across this before?New to this and any help would gratefully received
I am having this problem on a C5045i, I swapped ITB units but still happens on second one.Machine is level
What does counter 301 measure ?:confused:
changing an ITB, any tips for changing first one for me
not come across these