you can bkup readers values in service mode
and you can restore the values in service mode
clear reader controller in technical service
Reader controller pcb
Main Controller PCB
Type: Posts; User: tlanza
you can bkup readers values in service mode
and you can restore the values in service mode
clear reader controller in technical service
Reader controller pcb
Main Controller PCB
clean in the cavity drum and make sure your laseris cleamed
when i in counter light copies and all is good and clean
i lower my primary wires
the energy saver light is pulsating and i believe is your main controller
Clean itb or itb replace or change your registration patches sensor
"COPIER (LEVEL2)> OPTION> FNC-SW> JM-ERR-D" to "1", try this
it might work temporary it might need hdd
if booting up take long and freezing hdd and software
replace itb unit will solve your problem
canon ir c3380 is the itb unit needs to be replaced
replace itb unit and no more drum issues
have you reinstall the 2 lever sensors back on the copier..?
hi everyone
if you are missing any of these colors cmyk check the dust proof of laser units
spring comes off ...
just a reminder before changing major component