Search:

Type: Posts; User: copiertec

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Re: TA-5003i 0511 random jam on A3 orientation

    I believe we resolved the issue by adjusting the separation spring tension, we added more pressure and it seems to have worked.
  2. Replies
    13
    Views
    1,424

    Re: TA-5003i 0511 random jam on A3 orientation

    Adjusting the separation spring seems to have done the trick. We also installed new p/u, feed and sep rollers as well, but the jamming stopped with the spring pressure adjustment.
  3. Replies
    1
    Views
    491

    Re: Kyocera PF-7110 part # Needed

    Found it.
  4. Replies
    13
    Views
    1,424

    Re: TA-5003i 0511 random jam on A3 orientation

    It's autodetecting in inch. We have ordered all new pick up/feed/ and sep assemblies and I believe that white arm is part of that. We went out to one of the mfp's that we were having issues with...
  5. Replies
    1
    Views
    491

    Kyocera PF-7110 part # Needed

    We have the revised 8 parts manual, but can not find the part # for this part. I believe it is the front fulcrum plate that the jam door attaches to. The part manual has the rear fulcrum plate but...
  6. Replies
    17
    Views
    2,302

    Re: Low toner alert options and meter readings

    We use email alerts, for meters and alerts, but it does give you a ton of low toner alerts and have noticed that they start when the toner is below the 50% mark, so be prepared for a lot of low toner...
  7. Replies
    13
    Views
    1,424

    Re: TA-5003i 0511 random jam on A3 orientation

    Has Kyocera had any technical bulletins concerning this issue?
  8. Replies
    13
    Views
    1,424

    Re: TA-5003i 0511 random jam on A3 orientation

    Yes, it is set to auto detect, and is detecting both sizes on the machine according to orientation. I have not tried loosening the sep spring on the feed units. How much do you loosen the spring?
  9. Replies
    13
    Views
    1,424

    Re: TA-5003i 0511 random jam on A3 orientation

    Yes, it does it from every tray, it has 4, 2 being the PF-7100 LCT. I was thinking about the feed drive unit as a possibility.
  10. Re: 4501i machines overtoning or ghosting alot ???

    Yes, also, remove the transfer belt assembly while your at it and clean really good in there as well as that does build up with toner as well.
  11. Replies
    13
    Views
    1,424

    Re: TA-5003i 0511 random jam on A3 orientation

    It's running, 8" x 11" but when I switch it to 8" x11"r it does not jam. I am noticing more 0511 jams on the 02 and 03 series.
  12. Replies
    13
    Views
    1,424

    TA-5003i 0511 random jam on A3 orientation

    We have a TA-5003i, 80k on the unit, with an AK-7110 and a DF-7110 that gives random 0511 jams, paper makes it to the middle of the bridge unit when jammed. When the paper is running A3 (8.5 x 11),...
  13. TA-5003i 0511 random jam on A3 orientation

    We have a TA-5003i, 80k on the unit, with an AK-7110 and a DF-7110 that gives random 0511 jams, paper makes it to the middle of the bridge unit when jammed. When the paper is running A3 (8.5 x 11),...
  14. Re: 4501i machines overtoning or ghosting alot ???

    Are you vacuuming out all the waste toner tubes from the developing unit to the fan box on the back of the machine and all the filters related to that area? Most of our over toning issues come from...
  15. Host: local host scanner Status page randomly printing

    I have these pages that is printing out randomly from several different clients and from different brands of copiers. So far, it's61418 happing on our Brother, Sharp/Lexmark boxes. Anyone else have...
  16. Replies
    4
    Views
    676

    Re: taskalfa 5002

    When they sit you get dead area where the charge roller sits, you may have to install a new drum unit.
  17. Thread: Fuser kits

    by copiertec
    Replies
    3
    Views
    575

    Re: Fuser kits

    What model?
  18. Replies
    6
    Views
    707

    Re: MX-3071 Copy Scan Issue

    Did this just happen? Was it scanning fine until this incident? Were there any changes made to scanning settings?
  19. Replies
    10
    Views
    958

    Re: M2640dw jamming from tray 1

    I noticed smudges down toward the second half of the paper, I was not sure if that was drum related, but you have confirmed my uncertainty.
  20. Replies
    10
    Views
    958

    Re: M2640dw jamming from tray 1

    I will look into it.
  21. Replies
    10
    Views
    958

    Re: M2640dw jamming from tray 1

    The majority of the jams (26) are Jam4211 which is in the fuser area. I see there have been serval fuser updates and this one seems noisy when it's running so we are going to order an updated fuser...
  22. Replies
    10
    Views
    958

    Re: M2640dw jamming from tray 1

    I'll pull up a jam code list on it tomorrow, I had it with my printouts but it accidently got tossed with the rest of the paper.
  23. Replies
    10
    Views
    958

    M2640dw jamming from tray 1

    Copier has less then 10k on it and it jams from tray 1. Feed/separation/p/u rollers look good. The client had knocked the separation roller assembly spring out of place/ we put the spring back in...
  24. Replies
    5
    Views
    1,156

    Re: Copystar CS2552 drivers for mac

    https://www.youtube.com/watch?v=3jkNpFOLBtM
  25. Replies
    3
    Views
    1,097

    Re: M6635cidn document processor frame part#??

    That's what I need the part # for, I can't find it in the manual. The client cracked the frame where the hinges screw to.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4