Maybe, but all I need is a hint how to remove the locking of those two parts from the printer..
Type: Posts; User: LinxTech
Maybe, but all I need is a hint how to remove the locking of those two parts from the printer..
Hi guys,
we have one Xerox Versant 2100 and I need to disasseble it so we can move it to another location.
It has high capacity feeder and stacker attached and I need to separate those from the...
Hi everybody,
I've never seen this to happen.
Printer is stuck on "please wait. Starting system" window with energy saver LED flashing slowly.
progress bar doesn't appear on screen and you...
Thanks... I'll check this out...
Hmmm...
Second transfer roller (low)?
Paper setting?
Have you tried to swap yellow dev unit with another color?
Hi everybody,
I hope someone could guide me to right direction with this..
Customer with C7000 and two separate fusing units, has a problem with one fusing unit.
One fusing unit works just...
How about developer? Or developing unit?
With regards the upper heating lamp, I would also measure all three lamps with multimeter as sometimes it's difficult to see if all lamps are OK..
Would be great if you could give us picture of the problem.
I've had some issues with yellow, but I'm not sure if we are talking about the same issue.
Thanks for your quick reply. The point is (which I forgot to mention) that all filters are quite new.
Hello fellow Techs,
I have a one unit that has a lot of toner dusting. Whole interior of printer is covered with yellow toner (mainly yellow...).
It seems that dusting causes a lot of...
Did this solve your problem?
Wonder what's wrong with the forum.
I've tried to post couple of threads in Konica Minolta forum, but my posts never show up... System says my posts must be accepted by moderator...
Doing wrong...
Hi,
Registered a week ago and posted couple of things, but never see my threads in forum.
Site says that my posts must be first accepted by moderator, but seems that nothing happens. Maybe I'm...
Did you change developer unit or just the developer?
C-2411 is referring the TCR sensor.
The output of the TCR
sensor /Y (TCRS/Y)
cannot be controlled.
• Printer control board
(PRCB)
• TCR...
I just wanted to share this quick tip.
Customer had two broken paper lift motors. Small claws holding white coupling in place had broken and spring and white coupling had dropped inside the...
Greetings fellow Techs,
Just registered and figuring out how to give help and get help from fellow techinicians around the world.
Nice to find this forum...
Hello techs,
I have one 6501 with trays 1 & 2 not lifting paper stack.
Sensors work in I/O Check.
When inserting tray, tray 3 lifts the paper stack and works fine. Trays 1 & 2 won't do...