When you say you replaced the fuser, are you sure? For the 50xx series you cannot replace the whole unit, its has to be rebuilt. If that is what you meant by replacing the fuser then i apologize but...
Type: Posts; User: Jii
When you say you replaced the fuser, are you sure? For the 50xx series you cannot replace the whole unit, its has to be rebuilt. If that is what you meant by replacing the fuser then i apologize but...
Thank you, is the torque limiter for the retard roller part of the pick up assy?
Have you checked that white engagment cam that runs the itb? Its on the main drive assy and can be out of place.
Check out KB 90253 on esupport.
Unless this is the info you already had, if...
I wouldnt assume any of it is the engine of the machine because if prints and internal print outs are perfect then you know you're just dealing with the scanner.
Run a PG test print. If it looks...
There is an Article 84454 on esupport. Its a 1025.. so very very different model. But the fix in that case was to do an all clear.
Personally I would reload firmware then try it.
If it persists...
Hey. Ive got a 5551ci taskalfa that is popping a lot of J0533's.
The jam code means cassette 3 (high cap) is multifeeding.
Upon further inspection, its pretty wild, but if it doesnt jam it will...