Clean the itb driveroller.
Take out the itb and clean the belt insida and the drive rollers.
Type: Posts; User: Kapten
Clean the itb driveroller.
Take out the itb and clean the belt insida and the drive rollers.
If you are setting op the rip right with the right flow and right profil.
You can get quite good pictures.
The problem is that if the rip is using wrong profiles it looks like hell.
Is the...
A new firm + itb and the mc is great.
As far no problem with the mc.
We have quite many out in the field and thy are working just great..
Hello there is an modification of the door and pressure roller assy and change the vertical path roller. Then the jam will move to another machine in universe.
Contact a canon spare part dist and...
I haveīt changed the flat belt but the sensor could be the problem.
The sensor is clean but maybe there is a adjustment for the sensor.
When its blocked the led comes on.
I couldnt se if the...
Hello i have a delicius problem with a Trimmer the jam code is 11C9.
The paper get trimmed and the stopper dont move down.
The belt starts but the paper cant pass the stopper.
But it works 5 times...
It could be a memory problem. Try to change place of the memory. Once i had the boot rom that was fucking up.
And a big long shoot could be the pix card on the back. It is one of the slot in cards....
Turn off the m/c start the ripp wait 10 sec turn on mc.
Wait 5 minutes and try to surf to m/c.
If you cant surf to the rip you have to reinstall system.
Its not possible to just skip the rip. ...
Try to turn off multicast discovery. I think it could be the problem. And when you are on the go turn off snmp too.
It could solve the problem.
One chance is the maincontroller.
Have you made an hdd format and installd the whole system again?
If the boot sector with the "fat" tabel is ok.
Try to change the disk again otherwise its the...
He He He
My friends at work are going to love meeeeeeee.
This could be fun.
If the memory is ok. Its special memory you cant use other than original.
Ive tryed with 3 differnt memorys byt when i tried original it starterd instant
i think try new firm via sst.
Once ive had...
Im putting a dollar that it is the corona assy.
Try to run the m/c with open cover and see if the wires are glowing in a blue color.
If not change assy.
See if you have the latest firmware.
Look at Canons homepage if there is a new fw uppgrade.
It can solve yor problem otherwise ther is no other way out than change the head.
The whorst thing you...
If you cant browse via SMB. The protocoll isnīt activated on server.
Filesharing propertys or permissions.
Activate smb on server.
Destination settings must be wrong Usr PW or path
...
check if they have changed the port from 25 to another...
Its th sm*2 smtptxpn parameter in option mode if you want to change..
Gerhard is right!!!!
This is the info about it
# 801
A timeout error occurred while the machine was communicating with the SMTP
server to send an e-mail message or send/receive an...
If you are trying to change the fixing rollers 2 pcs dont forget the eject rollers to.
Or the whole assy and get happy in 15 minutes...
Hello everybody.
Ive got a problem with a PD to an iRC4580.
The same problem has appeard on another deck and another m/c before for me, but i dont remember so if anyone have a bigger or better...
Use X-over cable and deamontool.
Then you don have to burn the sytem and you will save time.
Good luck
One of the sensors is probably dirty or returning too slow to its original position.
If you are a tech you would knew how to get a jam code.
Otherwise call a tech and he will help you in a...
If i were you i would check the primary corona..
Or Potential control system.
Anoter easy thing could be the drum screw isnt tight.
Or the MSW2..
Disable potential control by going into service...
The pullscan option is not the best scanning option on the market.
I think you can use adf for scanning and get it faster .
Pullscan is blocking the mc when its in use.
What are you trying...
If C1 ris is the same as europe do like this.
The C1 rip in europe is a backpack.
Enter sm mode Option / int- face / img-cont 3
Connect and be happy.
Configure the rip from copier display...
A good idea is to reinstall the system.