when I have this problem it is related to the versions of ssl. i have to activate all versions: SSLv3, TLSv1.0, TLSv1.1, TLSv1.2
Type: Posts; User: korthr5
when I have this problem it is related to the versions of ssl. i have to activate all versions: SSLv3, TLSv1.0, TLSv1.1, TLSv1.2
Hell
The brother service manual has many more pages than the konica one.
The sensor is in Relay PCB ASSY inside the machine o will see the plastic actuator.
Hello
TN321 / TN-322 / TN-221 - they are the same
TN-515 / TN-512 / TN-324 / TN-514 / TN-513 / TN-325 - they are the same
Toner chip, so far i tested TN-328, the chip for all colors is...
The fusing temperature is adjusted by paper type and not by paper tray.
Try to see in what step it happens. like image malformation on transferbelt or after transfer roller or after fusing. During...
Can you post an example with the problem ?
Zeca
On 4050 the problem is the ADF.
When the machine is starting you listen the ADF testing the pickup arm ?
Regards
Hello
The problem is the option Short Edge or Long Edge.
You need to choose the rigth one.
Regards
Hello
To disable:
Administrator -> System Settings -> Reset Settings -> System Auto Reset -->> Screen Saver Function
Hello
In Portugal yes.
Machine more expensive.
Bad quality and white spots.
More fragil plastics.
And toner, and drum more expensive.
As Konica Minolta employee, login here: Bad Request
As partner, login here: Cornerstone OnDemand
Hello
Read the TAGB1701223EN (PSCSES_1701707EN)
Usually is SSD
Good luck
Hello
4052 is Lexmark rebranded, all lexmark image unis have this problem.
Replace the IU.
Interesting.....
Supposedly this problem had been solved in G00-45.
But for now the beep is solved.
But the symptom is the same ?
Hello
Check this TABT1900745EN and see if this is the symptom.
Hello
Utility -> Administrator -> Maintenance -> Timer Setting -> Power Settings
Hello
You make the calculations of cost per page of each machine ?
Konica A4 has a higher cost per page than A3.
Konica C227 has a higher cost per page than C258.
Their prices includes...
C35 wont work with toners of c25
C25 i never tested the toner of C35
This error normally, solved by updating the firmware.
Hello
Change the back and the front or only the front ? ( front near the blue handle )
Regards
I have the same problem.
I change:
- MFP Board
- Memory
- Hard Drive
- SSD
- The registration Module
- Motor from Main Drive
- Drum
Compatible toner, resin toner, original toner i have the same problem.
- If the client prints few pages per day - IU make white lines afert 10000 or 150000
- If the client prints all day long all...
Hello in Portugal, the KM replace the IU when not reach 100% for free.
Hello
The 4050, is Lexmark with Konica Firmware.
Konica buy the toners and the IU for 4050 and other remarked models, from Lexmark
Lexmark have this problem on all machines black and color...