Hi I really need to edit a post from approximately 6 months ago but there's no edit button - help!!
Type: Posts; User: Portabubblejoan
Hi I really need to edit a post from approximately 6 months ago but there's no edit button - help!!
Which door is it saying is open? Front, upper right, main right or lower right?
The lower right door has a modified version with a metal pressure plate on it instead of the spongy pads that...
Try doing a pg6 and see if colours are lining up correctly.
If not, do an auto correct colour mismatch from the adjustment and maintenance settings. I take it you have preformed am auto gradation...
If I'm reading the other post right..
I think you need to have img-cont set to 3 and mfd rebooted BEFORE you attach the fiery.
If you attached the fiery and then tried to change the img cont...
Is it an imagepass A1 or a Colorpass GX300 Fiery. I believe these are the only 2 compatible fiery models
You get what you pay for :cool:
And you're buying them way less often
The iR advance C52xx is much more robust than the advance C22xx. But the new advance C33xx are very reliable and the new paper pickup rollers last forever.
Id check the bearings on the ITB steering roller.
If the are seizing or gunked up or loose ITB will track to one side and give e075
Replacing the chip from old drum to new drum is a cheat - not recommended
check wee clips are on springs at front and rear of ext trans unit (one white, one black)
Clean laser and patch sensors...
Hi,
I work for Canon Direct. I have had loads of these but as yet haven't had one that couldn't be resolved.
First and foremost ensure the machine is level (not sunken into carpet)
I replace...
With the process unit open so you can see the drums. Rotate the process unit locking handle and watch the 4x caps rotate at the front side of the drums. Sometimes these become detached and the...
Check the engagement arms for the cyan primary transfer roller inside the ITB.
Perhaps primary transfer roller constantly engaged?
Check the life of the external transfer roller if it is patchy. Also there are springs and clips at front and rear of ext transfer that occasionally fall off.
Are you getting any error codes