Hello, given the limited knowledge of oce products, I humbly requested your help in figuring out this problem.
The standard scan to email, to a mac user, and this also happened with the older...
Type: Posts; User: DarkCrimsonFox
Hello, given the limited knowledge of oce products, I humbly requested your help in figuring out this problem.
The standard scan to email, to a mac user, and this also happened with the older...
detailed list of what happened so far. Hopefully we can solve this issue as fast as possible.
Day 1- 2F25 ,
Old carriage install
* HP sensor works, it changes state in I\O mode.
If what is mention above doesn't work, Maybe try a different stock of paper.
If the paper has a huge amount of toner, it should runner a tad bit slower through the fixing. At least that is my...
I've seen a TP on this.
Gmail
Account settings
Make sure "Access for less secure apps " is unlocked/off
Normally it's blocked.
What I'm thinking is replacing the flex cable and reset each connector on the main and carriage board. Flash the machine and see what happens.
Could the multisensor cause the issue ? I didn't...
I heard a similar issue from a tech. A C5051 was sucked dry in each dev. He had to replaced all 4 and HVT. Not sure if the found the cause.
Try and pin point the issue if you can.
*** Maybe...
What is the count on this machine ?
I'm trying to remember how does this machine work. I'm trained on so much, I don't remember each machine. I rarely come across C3320.
Assuming this machine...
During my months as a tech, I've notice that many are discourage with dealing with CDS and or com test. I wanted to create this thread to help those whom are trying to have a successful connection. ...
I had a feeling, I do hope its the flex cable when I replace it tomorrow. I didn't expect the cable to crap out during a calibration. Aside from that, I hope I don't have to put in that main board.
Hello fellow techs, I've encounter a troublesome problem.
4027 - Last Tech
Weeks after....
Day 1 - of my visit
My machine had a 2F25 error code. The HP Sensor works ( it change state in...
Hello strangers, I've taught my post wasn't approved during the first week of my stay. Otherwise, it's great to see several people posting.
If I may add on, I'm going for training on the oce...
As a side note, I've replaced 2 cpu control panel board within 2 weeks. If you see it occur on an IRADV 4000 and I adv 5200 series, don't rule it out. It's likely the cpu board. The 5200 board is a...
Hello my fellow Techs, I've been hunting for forums that can better enhanced my knowledge of Canon machines. I've a service technician whom was hired last year. Given the structure of the Canon...