the 601 is a flaming pile of garbage.
IC-413 and a video interface kit is the way to go.
Type: Posts; User: Synthohol
the 601 is a flaming pile of garbage.
IC-413 and a video interface kit is the way to go.
never heard of that on a konica.
do a background data reset and stabilize and do the gradations.
print the 4 built-in charts, look for repeating patterns and distances between them to see if its drum, dv or even HV related.
the...
if i still had access id give it to you.
maybe one of the other current MKM users can help another contributor ;)
ck your PMs :)
boot to firmware stick and make sure machine/type is not FF
correct hex is in the manual.
able : Machine type information
First four digits of the serial number
A7PU
A7PY
A7R0
link sent :)
copyman, your inbox is full.
i have link for you.
wanna laugh? all i saw was "scanner" "423" "firmware NG"
had that so so so many times with 100 of them i serviced at a school and foundry facility.
i stopped randomly upgrading any firmware after...
there was a scanner only firmware that was published.
that may help.
i sent a PM with what i had to help.
hope it helps!
thanks for being a contributor!
is vendor2 set to card?
wow!
to me thats a biohazard and id tell them to contact their insurance company and the service contract is void.
i removed half a rat from a 20 bin finisher once. never again
a machine at a...
more than a couple times ive had paper still in the ream installed in the tray. like its supposed to unwrap itself like a christmas miracle.
Utility Software Download - List | KONICA MINOLTA
Utility Software Download - Result | KONICA MINOLTA
i have y1 and y2.
see PM
the whole FWxxxx folder goes on the root of the flashdrive as is.
dont extract nothing past the original .exe self extractor to see the FWxxxx folder.
you say it happens on copies too?
reduce the image by 50% do the lines shrink with the image? i know its not optical. just wanted to see if during image processing those lines if they were part of...
hold down the yellow button while booting into trouble reset mode then access service mode.
once you are able to do it then id check the touchscreen for calibration.
i may have found something?
ck your PMs.
you can scan to O365 email but sharepoint is an app by itself afaik
https://youtu.be/S8Jbo4vIpNI
there is also not a hint of yellow on that page.
have you done anything so far?
I was only able to help this contributor with stuff I had but I don't have access anymore.
If someone with MKM access can help him?
He did donate on my request so I feel bad I didn't have this file.
kill it with fire.
seriously though, id initialize the machine in service mode, install firmware again and run the calibrations.
thats so far out of an adjustment range i wouldnt even try.
...
lift the front left corner of the scanner with maybe 20 lbs of force up and make a copy.
looks like scanner sag to me.