hit the actuator then drop tray all the way. look in the slots at the u channel guide rail, should be an even gap the whole way.
ive seen these get bent from strapping the finisher too tight in the...
Type: Posts; User: Synthohol
hit the actuator then drop tray all the way. look in the slots at the u channel guide rail, should be an even gap the whole way.
ive seen these get bent from strapping the finisher too tight in the...
lol, start the copier with the finisher door opened, hold the claw in the up position as if the tray is full and close the finisher door. it will drop. open the door when its down enough.
the...
maybe throw jotunn some rep points for the assists huh?
click the sheriffs badge under his avatar and add reputation.
he did you a solid, please return the favor!!
maybe this can help?
i needed to know this stuff when i passed my KM networking expert test series.
totally goldfish memory'd it though, i dont remember much but the guide will help you write your...
become a contributor.
[SMB Authentication Setting]
Select an authentication method for SMB transmission according to your environment.
[NTLM v1]/[NTLM v2]/[NTLM v1/v2]: Select this to use the function in the NT ...
does it appear anything like any of the sample CQ problems from the manual?
do you need the manual?
i use the a00j's on everything. all 3 rollers, everytime.
never liked the finned rollers and only when they did better picking up some glossier brands of paper.
i just swap the axles in seconds for...
that screen is when you replace the whole DV unit, not just the bags of DV.
if the dv unit has over 600k resetting the unit counter may have negative effects.
not saying thats the cause of the...
also selecting "card" as the device in the same area.
maybe throw jotunn some rep points for the assists huh?
click the sheriffs badge under his avatar and add reputation.
he did you a solid, please return the favor!!
i assume thats colon D?
just asking because ive had that happen on forums before.
i get around it using php tags
:D
sorry, didnt mean too hijack, just one of those tidbits i love to share.
is the upper left duct clogged?
also any dv unit that leaked on me i just replace it and warranty it.
if no warranty its the cost of business we are in.
just to cover all bases id remove the HV...
in almost any bizhub these work.
AU-205H
AU-205H IC Card Reader
R5427000136466
Software Downloads | rf IDEAS for configurating software
1, reader must be compatible with copier. there are quality RFIDEAs readers like BKU version that dont work on konicas, it required ATK version or something.
be careful, not every reader or card...
there are so many fine adjustments when working on a production machine.
at least if you did a PM there is the step by step screens that guide you from one adjustment to the next.
all these steps...
not listed though.
https://www.copytechnet.com/forums/attachment.php?attachmentid=62318&d=1712941643
is the user name added to the share full access permissions of the shared folder?
Software SW No.219 0x00: SMB1.0/2.0 are available. (default)
Software SW No.219 0x04: Only SMB2.0 is available....
7. After replacing the drum unit, conduct the following items.• Cleaning the dust proof glass (Refer to F.5.2.1 Cleaning thedust proof glass)• For the drum unit/Y: Counter reset of the parts counter...
when ive seen that either the wrong driver or acct track isn't enabled in the driver or the pc is using WSD instead of the IP right way :P
^^^^bump^^^^
another postage stamp :(
hard to tell from a postage stamp.
please post a full size or at least a 50% image.
there is a space before the letter C in this entry?
...
i have both v5 and v6 on my laptop, just have to specify when installing 6 you want to leave 5 alone and not upgrade it to 6 but install a separate install.