To most customers having a life over saying on the screen is the same as being down. Sorry for a little confusion.
This last part of your comment though, is completely un necessary.
Type: Posts; User: nightshade
To most customers having a life over saying on the screen is the same as being down. Sorry for a little confusion.
This last part of your comment though, is completely un necessary.
There is no warning about live but the copier will stop when the fuser life is over.
Never saw this one.
I have a KM-8031, HP 1050C, HP P3005 and a Sharp AR-P450. Plus some small inkjet, photo, dymo, etc.
I believe that KM uses a 2 wire plug on their fax kits, so you can use any standard phone line 2 or 4 wire and it wont make a difference.
WCODY if you use the "off hook" mode do you get a...
Yeah, going by memory and on the weekends my mind is mush!!
But you knew what I meant!!:) Even if I was tongue tied!
We all carry HP mini's. They can do just about everything once you can get past the small screen and keyboard.:(
Sounds like a sticky paper feed clutch. Especially if the other paper sources work fine.
Electro magnetic clutch on the rear frame end of the feed head, been such a long time since the dinosaurs...
Any firmware newer then 6M should have the patch included. That would be pretty old. The firmware on this machine is the latest and greatest.
Sure, log in to your account at www.mykonicaminolta.com download the current firmware, load it on a CFC and instal it to the machine.
You will need to call a KonicaMinolta authorized service technician in your area, for this.
I have a C550 woth close to 2mil on it evenly cut between B/W and Color. The machine has been trouble free for it's whole life of 2 years with the exception of eating transfer belts.
The main...
Does your machine meet the following requirements. Probably not.
The mainbody must have 1152MB of memory installed to print banners.
Machines with the optional FieryŽ controller require...
The LU-202 is the large capacity tray.
Big thing that is attached to the right side of the copier, ganerally has alot of paper in it.
Probably came unplugged if the copier was moved. Or has a...
Try this.
To turn on Banner Printing, perform the following:
1. Select Utility/Counter key.
2. Select [6. Banner Printing].
3. Select ON.
4. Press OK.
5. Slide the Finisher away from the...
I don't see any referance to a "moonlighter" in the initial post.
But hey, go for it. If you find a "moonlighter" willing to risk his/her job, benifits and retirement for a little side work, or...
Check your PM box
WOW how things change. That was 4 years ago. Still with the same company and boy has it grown. From approx. 100 employees to over 300. From covering 1 state to 3 with a foothold in 4 others.
Man...
If $150 an hour seems high, put your machines under a service contract and pay per print. Then you won't need to worry about how much it will cost for repairs because it's already paid for.
Then...
If you search the "all solutions" you find this.
Description
Start button is flashing.
Solution
CAUSE: PJ 7 on the power supply is disconnected. The power supply was just replaced.SOLUTION:...
The "image" units on these machines are known for failure. Print out your half tone patterns and if the only bad pattern is for a single color then 99% that you need to replace the unit.
When the...
Is this being done at the control panel of the machine or on the web page?
If not the web page I would go and enter them there, much easier when you can utilize your PC's keyboard.
Does "behind the system control board" sound better?
There is a bulletin on this (a couple of them). This is a problem in high humidity areas. There has been a change to the charge plate and grid for this error(s).
Do a full PM, drum, dv, mk. Go...
1st make sure that the port on the hub is not the end port and it is set to crossover.
2nd get on a work station and "ping" the copiers IP address. If you get a time out then there is no...
Gotta love the tech line hold time!!
You know, you could always take a sharpie and color in a little black box where the widdle oil can is.....