1. Exchange another intermediate belt unit to find out whether the issue still exists.
2.check fusing speed which can be adj in the process adj in the paper tray setting
從我的iPhone使用Tapatalk...
Type: Posts; User: snoopyed
1. Exchange another intermediate belt unit to find out whether the issue still exists.
2.check fusing speed which can be adj in the process adj in the paper tray setting
從我的iPhone使用Tapatalk...
What is the error code?
從我的iPhone使用Tapatalk 發送
Hi, I got a weird problem.
BH-1051 shows a request “please close the cover of ADF” Once I open the cover.
This cover is above the paper feed section.
Then there was no response after the cover...
Hi, I thought the point is auto gamma and color registration adj. when machine is warming up or before printing, it will do adj but without transfer image to paper. So only the counters of transfer...
https://uploads.tapatalk-cdn.com/20170828/7c5c49c7c43c648fd07aa02fbb3cca88.png
從我的iPhone使用Tapatalk 發送
https://uploads.tapatalk-cdn.com/20170828/b0aa6d21ae77044ae555a82b3cd69a4d.png
從我的iPhone使用Tapatalk 發送
I just solved j-3204 on the C7000 recently .
It's same problem about the paper too late to leaving paper exit sensor PS16.
In my case, the root cause is the rear side screw of fused paper exit...
How many print counters with lower fuser belt unit ? In my case, this image problem will show up when the lower fusing unit is not so good. Some times this problem can not be solved even I replace...