I finally fixed it today by scraping some parts beneath the guide where the separation roller is mounted. The guide keeps hitting the edge of the paper during duplex copying.
I still don't know...
Type: Posts; User: joshua_94
I finally fixed it today by scraping some parts beneath the guide where the separation roller is mounted. The guide keeps hitting the edge of the paper during duplex copying.
I still don't know...
Hello! I kind of have the same problem also. The jam code is
66-14The paper would jam at the ADF exit section. Sometimes, some papers would go through without any problem. What I've done so far are...
I replaced the Cyan Developing Unit and the problem was fixed.
Thanks everyone! :)
I tried switching the Cyan drum with the drum for Magenta but it still had the same result.
I recently replaced the Transfer Belt 2 months ago because it was causing P codes.
I also tried to...
I have a problem with our client's Bizhub C280 machine that is producing a double image. There are no error codes on the machine. What I did so far was switch the drum with another drum but the...
Hello, I have a problem with our client's Bizhub C452 machine. I already did some adjustments in service mode prior to posting this thread.
I've changed some values in Thick Paper Density, Max...