Yes, have had that issue with the 6635. Takes some time to recover.
Sent from my iPad using Tapatalk
Type: Posts; User: Ropariva
Yes, have had that issue with the 6635. Takes some time to recover.
Sent from my iPad using Tapatalk
I’ve seen registration out that could only be fixed doing multiple manual adjustments before. I will remember this and try it next time I see it. Thank you.
Sent from my iPad using Tapatalk
Looks like it is laser related. Only one colour. You’ve eliminated everything else. I presume you’ve done multiple laser cleans? Easy enough to pull out the laser unit and inspect and clean the slit...
I’d be pretty confident it’s a hardware issue. If you have the optional HDD try that first but my money is on the ssd. I’ve definitely had a few of those fail
Sent from my iPad using Tapatalk
Can’t help, sorry. Your machine is not only very old, but has been highly modified. Totally outside my expertise. Good luck.
Sent from my iPad using Tapatalk
You’ve totally lost me Unless you have some voodoo custom firmware I’ve got no idea what you’ve done or how you did it.
Sent from my iPad using Tapatalk
https://uploads.tapatalk-cdn.com/20240227/ca5a86ef2a1e6e57de3c6f33ff33b7e4.jpg
https://uploads.tapatalk-cdn.com/20240227/3b40a28893c23bb6295c421f916d0784.jpg
Hope this helps. If you are putting one...
Do you mean U021? Memory Initialise.? This will just default the machine to factory and any settings you’ve changed will be restored to default. Are you able to run U464, U469 and U410. What sort of...
Is it the colour reproduction you need to adjust or image position from ADF?
All image position adjustments can be done manually and using auto adjust in U411 the machine spits out the test chart
...
It’s often a transfer belt spring connection issue. Did you stop the image part way through to see if you have image at the drum?
Sent from my iPad using Tapatalk
What have you done so far? Have you swapped drums around to eliminate the drum from the equation? Do you have another machine you can swap the dev in/out?
Looks like you may have lost dev bias, so...
It’s possible the colour table data has been deleted from one machine. This happens if it has had a U21 done. Check the firmware under U19.
Although colour tables aren’t selectable for this model...
Once the developer has been depleted to that level, it will never recover. The carrier itself is pretty generic and I’ve recovered machines in this situation by using developer from other TaskAlfa...
https://uploads.tapatalk-cdn.com/20240205/8d7a62705dd23f48edf791e854410374.jpg
61483
May be a different number for UTAX
Attached here.
Sent from my iPad using Tapatalk
I’m pretty sure what you are hearing there are all the toner cartridges rotating in their normal warm up routine. There is a bulletin about this and the fix is to apply the kit of foam and Mylar...
As well as the cassette size thumb wheel rotating, I’ve had to replace the adjacent switch block on a number of machines due to intermittently showing the wrong size and subsequently having to a jam...
Protocols required are SNMP and Enhanced WSD
KM net viewer is a great if somewhat unintuitive tool. I use it almost every day.
If you have previously communicated with this device and you have...
Yes they are and no I haven’t. I have a stockpile of decent second hand ones. If one breaks I don’t even try and fix it.
Sent from my iPad using Tapatalk
Forget the U412. Do a U464, 469 then go straight to U410.
If your optics mirrors are dirty you may have issues with tone curve. Ensure they are clean and that the black squares on the front edge...
Being a printer there is no U917
Firstly set one machine up with all the details you need through Command Centre
Then use Kyocera Net Viewer
Discover the machine
Right click on the machine, you...
ECO mode on for copying?
Sent from my iPad using Tapatalk
Have had similar Checking which iPads and wireless routers are involved. No solution as yet. Latest firmware.
Sent from my iPad using Tapatalk
First up, what’s the jam code you are getting? Most common is due to fuser belt slip and is J4211. Fuser replacement is the only cure. Usually happens at the 30k mark.
Ghost print on preprinted...
Earlier machines used Admin and Admin. New ones use the serial number for the password. Have you gone in and changed the machines admin password? This is one of the first things we do. We use a U917...
Have had several discussions with Kyo regarding parts like this. The answer is always order the assembly [emoji53]
Sent from my iPad using Tapatalk