Search:

Type: Posts; User: Ropariva

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    1
    Views
    244

    Re: Kyocera P2235dw Shading From Fuser

    By “shading” do you mean the entire image has a background?
    Our experience with these is the fuser will last typically a maximum of 35k before the belt slips causing smudging halfway down the page...
  2. Replies
    3
    Views
    144

    Re: CS 3510i C3300 error code

    The white reference strip is clean and in place? The scanner moves under the white reference when the lamp lights?
    I that’s all ok and you have tested the parts, I’d take an engine board.


    Sent...
  3. Re: 7003i Line on page on long runs 20+ copies/prints

    Kyocera 7002i thick solid black line
    Kyocera 7002i thick solid black line


    Sent from my iPad using Tapatalk
  4. 7003i Line on page on long runs 20+ copies/prints

    There are previous threads on this issue. I’ve had it on a couple of separate machines that went on to do over ten million each.
    I’m pretty sure replacing the vertical transport unit actually...
  5. Replies
    14
    Views
    977

    Re: KYO Jam Code Quick Reference

    It’s not complicated. It goes against all dealer codes of practice. More likely someone would give you access to their bank account.


    Sent from my iPad using Tapatalk
  6. Replies
    6
    Views
    373

    Re: ECOSYS P5026cdw - disable printing

    You can set it to stop printing if it’s out of colour. This is generally default anyway.
    I’d be looking at sending a message to the Home Screen that tracking is activated and if they would like to...
  7. Replies
    13
    Views
    958

    Re: Kyocera 7353ci magenta problems

    Yes, have had that issue with the 6635. Takes some time to recover.


    Sent from my iPad using Tapatalk
  8. Replies
    13
    Views
    958

    Re: Kyocera 7353ci magenta problems

    I’ve seen registration out that could only be fixed doing multiple manual adjustments before. I will remember this and try it next time I see it. Thank you.


    Sent from my iPad using Tapatalk
  9. Replies
    13
    Views
    958

    Re: Kyocera 7353ci magenta problems

    Looks like it is laser related. Only one colour. You’ve eliminated everything else. I presume you’ve done multiple laser cleans? Easy enough to pull out the laser unit and inspect and clean the slit...
  10. Replies
    5
    Views
    1,207

    Re: 3253 freezing up

    I’d be pretty confident it’s a hardware issue. If you have the optional HDD try that first but my money is on the ssd. I’ve definitely had a few of those fail


    Sent from my iPad using Tapatalk
  11. Re: Need Kyocera 3051Ci Charts for Adjustment Please help.

    Can’t help, sorry. Your machine is not only very old, but has been highly modified. Totally outside my expertise. Good luck.


    Sent from my iPad using Tapatalk
  12. Re: Need Kyocera 3051Ci Charts for Adjustment Please help.

    You’ve totally lost me Unless you have some voodoo custom firmware I’ve got no idea what you’ve done or how you did it.


    Sent from my iPad using Tapatalk
  13. Replies
    2
    Views
    574

    Re: TA 6054ci Cassette Heaters

    https://uploads.tapatalk-cdn.com/20240227/ca5a86ef2a1e6e57de3c6f33ff33b7e4.jpg
    https://uploads.tapatalk-cdn.com/20240227/3b40a28893c23bb6295c421f916d0784.jpg
    Hope this helps. If you are putting one...
  14. Re: Need Kyocera 3051Ci Charts for Adjustment Please help.

    Do you mean U021? Memory Initialise.? This will just default the machine to factory and any settings you’ve changed will be restored to default. Are you able to run U464, U469 and U410. What sort of...
  15. Re: Need Kyocera 3051Ci Charts for Adjustment Please help.

    Is it the colour reproduction you need to adjust or image position from ADF?
    All image position adjustments can be done manually and using auto adjust in U411 the machine spits out the test chart
    ...
  16. Replies
    2
    Views
    390

    Re: Missing magenta color on 408ci

    It’s often a transfer belt spring connection issue. Did you stop the image part way through to see if you have image at the drum?


    Sent from my iPad using Tapatalk
  17. Re: Kyocera 5052ci blue background only when printing color

    What have you done so far? Have you swapped drums around to eliminate the drum from the equation? Do you have another machine you can swap the dev in/out?
    Looks like you may have lost dev bias, so...
  18. Replies
    4
    Views
    497

    Re: Color Matching Kyocera M8124

    It’s possible the colour table data has been deleted from one machine. This happens if it has had a U21 done. Check the firmware under U19.
    Although colour tables aren’t selectable for this model...
  19. Replies
    10
    Views
    1,255

    Re: TASKalfa 2554ci Color defects

    Once the developer has been depleted to that level, it will never recover. The carrier itself is pretty generic and I’ve recovered machines in this situation by using developer from other TaskAlfa...
  20. Replies
    7
    Views
    697

    Re: 3553ci noises only in the morning.

    https://uploads.tapatalk-cdn.com/20240205/8d7a62705dd23f48edf791e854410374.jpg
    61483
    May be a different number for UTAX
    Attached here.


    Sent from my iPad using Tapatalk
  21. Replies
    7
    Views
    697

    Re: 3553ci noises only in the morning.

    I’m pretty sure what you are hearing there are all the toner cartridges rotating in their normal warm up routine. There is a bulletin about this and the fix is to apply the kit of foam and Mylar...
  22. Replies
    11
    Views
    3,717

    [Jamming] Re: Kyocera ECOSYS P6230cdn jamming issue

    As well as the cassette size thumb wheel rotating, I’ve had to replace the adjacent switch block on a number of machines due to intermittently showing the wrong size and subsequently having to a jam...
  23. Replies
    4
    Views
    656

    Re: Kyocera Net Viewer Questions

    Protocols required are SNMP and Enhanced WSD
    KM net viewer is a great if somewhat unintuitive tool. I use it almost every day.
    If you have previously communicated with this device and you have...
  24. Replies
    2
    Views
    436

    Re: kyocera 6525/8525 doc feeders

    Yes they are and no I haven’t. I have a stockpile of decent second hand ones. If one breaks I don’t even try and fix it.


    Sent from my iPad using Tapatalk
  25. [Misc] Re: Calibration ruined my black density TA-3051ci

    Forget the U412. Do a U464, 469 then go straight to U410.
    If your optics mirrors are dirty you may have issues with tone curve. Ensure they are clean and that the black squares on the front edge...
Results 1 to 25 of 499
Page 1 of 20 1 2 3 4