I have a Taskalfa 250ci with DF-780, and when cust is printing with collating option the finisher does this Whining noise and when you look at the finisher you see the belts spinning fast and then...
Type: Posts; User: compelecttech76@gmail.com
I have a Taskalfa 250ci with DF-780, and when cust is printing with collating option the finisher does this Whining noise and when you look at the finisher you see the belts spinning fast and then...
So you telling me this doesn't come lubricated from the manufacturer. Because the first and second belt were complete unit. Cleaning blade already in transfer belt assembly
Hello all, I have a quite unique issue with this KM C558.
The machine only has 40000 copies, but we've had to rpl the transfer belt already. (shredded).
Rpl transfer belt on 11/15/17, got a...
Hello all, I have a Lexmark T652 that has an issue of horizontal void on the left side of paper when printing no set pattern.
Changed toner, transfer roller, charge roller, high volt board,...
Hello I am getting a 7217 jam code when printing on BH360 with FS-529 installed. When I removed the finisher the machine works fine. Any suggestions
Not a power issue, tried a different Bizhub 25 and worked fine.
Also did the *45 reset and still same error
Tried it new IU and firmware same error
Hello all,
I have a bizhub 25 with a Checkout error 18 fuser error
This is what the service manual suggests.
18: Fuser Error
Causes:
(The number indicates the detailed error...
I searched for a bulletin but I could not find one related to this issue. Would you happen to remember where on KM site the bulletin was located. Much appreciated
Hello all,i have a Bizhub 25e that's giving a lamp error. Call service msg.
Now what's crazy is when I restart the machine with the ADF closed I get the error. But when I restart the machine with...
Did that already
I tried a formatter from another working machine
Hello all,
I have a HP CLj M553 that will not print black.
I've change toner
Ive changed laser scanner
I've changed High volt board
I've changed secondary transfer roller
I've changed...