SOLD
Type: Posts; User: xrootx
Greetings.
I sell brand new, unopened spare parts for Konica Minolta Bizhub C3850/C3350 series.
1 x Genuine Konica Minolta FU-P05 Fuser unit.
1 x Genuine Konica Minolta A4Y5WY2 Transfer Belt. ...
Print - no any skew anymore. Scan to PC - there is small skew (1mm) sometimes, but not often.
Perhaps, I did not fix it, but after Chinese toner replacement there are no any problems.
If I understood right. Yes, the printer scan and print with skew. Even if, you firstly print, there will be a skew too, and after when you will put paper to ADF and press scan to computer the offset...
When I had tried to print configuration page I saw the skew (simple print) and after I put this page in ADF (skew increased). After the toner replacement skew disappeared during the print and ADF...
Hi everyone.
I would like to say thanks everyone for help. Finally, I have fixed problem with paper skew.
37622
The main problem was with non-genuine toner. I have just received and replaced to...
Thanks everyone for help. I will try to dissemble this printer in order to understand the problem or will dissemble for spare parts.
No, I print only 20 pages per month via ADF. Also, I figured out that there is small skew during the simple print 3 - 4 mm top and skew increased during ADF scan. The rollers were replaced to new...
If I understood right, I have just checked hinges ( HP LaserJet Pro 400 MFP M425dn ADF Hinge, Genuine (J8802) ) and everything is ok. It was replaced to new by warranty 1 year ago. The previous was...
Hello
37420
I have the following problem with ADF. When I am trying to scan doc from ADF, the margin is incorrect on the top (offset to right side). As you can see from pdf file. Tried to clean...
Thank you, so rechipping is not so good.
Thank you for quick and clear answer. Unfortunately, I do not have direct or dealer access to KM's firmware.
I am using "used printers" without warranty and any technical support.
Thank you for the information.
I have some experience how to update KM 4050 & C3350 and I have already updated to latest firmware without any issues.
As I understood KM firmware is not free of...
Hello!
I am looking latest firmware for KM 4050 & C3350. How can I get it?.
Thank you.
Yes, you're are absolutely right, I would like to increase profitability of KM bizhub 4050 and I want to use Imaging unit(A6VM03V) and toner(TNP44) second time.
I am not sure about Samsung powder,...
Hello.
There are two questions about Konica Minolta Bizhub 4050.
1.
Is it possible to fix sensor touch display on Konica Minolta Bizhub 4050. This touch display do not react on touching. You...