Search:

[QUOTE=subaro;516901]I have developed a rather crude way of troubleshooting the drum/dev on this machine to pinpoint the defective ones. First go to the panel menu and select the paper output to...

If it were me I would do some disassembly. It will be obvious if your drums aren't cleaning, if the transfer belt isn't cleaning, or if there are mountains of toner atop the developing units. ...

Hi Kyo Fan,

if you are looking at the frequent sport it cannot be the drum blade. Do you agree ?

There are so many cleaning blades.

Do you think it could be the transfer cleaning blade?
...

Hi Tony & Forum,

it looks like I am not done with this printer.
The paper jamming is gone since I have the new fuser in but take a look on the pictures.

I am getting periodictly ink stains....

Dear all,
since I have the new fuser the first prints were close to perfect.
The suddenly it started to make black stains on the edges of the paper.

What is the reason for this phenomena.

...

YES YES YES it was the fuser causing all the problems.

Folks can I use any 100pin DDR DIMM or 100pin SO DIMM for this printer.

There is so many DIMM Mempry on the market.

Thanks

Dear Subaro & Tony, all

I have ordered a new fuser and I hope it will solve the problem.

The upper fuser role had an flat area in the horizontal line. (see picture) If you turn the gear and it...

There is an error in the post.
The Sensor is is called KP-982.

Does anyone knows how to test this sensor unit?

Greetings

Good moring Australia,

may the experts helping me understanding the event log codes of my FS- C5016N

For example:
Nr.

16 104641 02,1C,00,00,00,00,00,00,00,00,00,00

15 104641 ...

Hi MADAS,

my reply is very delayed but I have similar issues. My print do get stuck direcly before the fuser, most of the time the printer is cold.

Can you show me which sensor do you mean?
...

#

Thank you Tony,

can you tell me as well how to read out the event log, before I spend money for a fuser?

Does this unit has a web interface. i doubt it?

Greetings

Dear All, my name is Bob and I am new in this forum. Hi to all and thank you in advance for your support.
I have got a Kyocera Color Laser Printer Mita FS-5016N and I need to decide weather I am...