I'd prefer using smb rather than ftp.
By the looks of it seems to be your ftp input settings is incorrect, try checking it again, folder path, login details, etc..
Sent from my SM-J530Y using...
Type: Posts; User: Victor679
I'd prefer using smb rather than ftp.
By the looks of it seems to be your ftp input settings is incorrect, try checking it again, folder path, login details, etc..
Sent from my SM-J530Y using...
Hi Sema,
Black Toner - 6R1525
Cyan - 6R1528
Magenta - 6R1527
Yellow - 6R1526
Note: Normally they are written in the User Manual or on the packaging.
Sent from my SM-J530Y using Tapatalk
Had that issue once. Thought it was a HDD or firmware issue but it wasnt. Turned out to be an OP panel issue. Replaced it with an alternative which finally solved the issue...
Sent from my...
You could try to initialize the machine via tech mode...
Sent from my SM-J530Y using Tapatalk
Suggest you don't. Better find a another brand. They were quite good intially but ever since HP acquired them. It has caused alot of problems: parts, consumables, orders, etc, etc....
Sent from my...
Hi guys!!
Managed to finally fix the issue. Had to reset the User system settings:
Intialize NVM > sys-USER
Solved the whole problem. Surprised that it was that simple..lol
Thanks!!
Thanks Phil,
would you happen to know where we could obtain the edocs from??
Sent from my SM-J530Y using Tapatalk
Hi,
Hope everyone is well. A client of mine has a Fuji Xerox DC II C3000 colour MFP. It was working well ever since we sold it to him as it was ex lease machine. Just recently a few error codes...
Hi,
I've been working on some Xerox machines and I am currently looking for the following Xerox Service Manuals:
Fuji Xerox DocuCentre II C3000 series
Fuji Xerox DocuCentre III C3100 series...
Hi,
I'm not quite sure about using that HDD as I have never tried it but I can give you the Part No. for the HDD issued by Samsung
JC59-00032A (Alt: JC59-00035A).
Regards
Hi,
Its probably a HDD issue. Should try replacing the HDD then do a full recovery. Had this once with the 8230. Replaced the HDD and now its up and running.
Thanks..
Hi Morne,
Just PM you. Please Check...
Thanks
Hi Edward,
Apologies for the delay. The firmware that you have atm is the latest that Samsung has for that model. They have not released any firmware later than that.
Kind Regards...
Hi,
I have a Fuji Xerox DC2056, and im trying to access the system administrator so i can setup the scan to email settings and SMB settings but i cannot access the web interface. I have tried the...
Hi, could someone please help me how to setup the scan to pc and fax for a Xerox DC-II 2005. Would really appreciate any help.
Thanks!!!
Hi!!
By the looks of it could be that your Airprint app needs updating. Or you could try reinstalling the app on your apple device.
The X3220NR does support labels. The cassette tray does not support it but rather the multipurpose tray does. I have attached an extract of the page from the SM about the types of media the machine...
Or what I usually do is you can try wiping some oil on the rubber, then leave it for a while and then wiping it off with a cloth. Makes the rubber tacky again.
You might wanna try checking the solenoid and the feed sensor.
Hi,
Just wondering if anyone would care to give us a soft copy (pdf) of the following service manuals and Parts List:
Fuji Xerox DC C450 (Colour)
Fuji Xerox DC II 2005 (Mono)
Fuji...
Thanks for Reminding me!! I can post now on the forum..
Hi,
Just wondering how can I enable to post a thread on the "Service Manual Request" forum. I have tried posting but it does not allow me. Please help as I am trying to get a hold of a few SM's &...
Hi,
Please see the attachment for instructions on removing the pickup roller.
Hi,
The problem could be that there is no toner being supplied to the imaging unit. Have you tried changing the imaging unit?? If yes then what i suggest is try to swap your toner supply motor; if...
Hi guys!! Does anyone know a solution for solving an error code 010-327 for the above mentioned machine??