luckily haven't spent too much time on this issue. But I have a J99-01 jam coming out of tray 3. I've read a few threads on this lovely forum and followed the advice given here but I have not been...
Type: Posts; User: TayTayTheTechnician
luckily haven't spent too much time on this issue. But I have a J99-01 jam coming out of tray 3. I've read a few threads on this lovely forum and followed the advice given here but I have not been...
There is a kit available too. I'm going to try it out.
Ricoh KIT-C2800 TRC Transfer Roller Case Kit, Genuine (K0054)
Thank you for this information. I have the service manual, but I was assuming that the '107' service mode was corresponding to the copier service mode. there are only three buttons on the plock...
Is anyone on this thread willing to chat with me in regards to BK5010? No one in my area touches these anymore and was given the task to repair one but I'm running into issues that seem to be caused...
Hello! I'm banging my head against a brick wall.
I'm working on a plockmatic 5010e that is standing without a plotter. there is a trimmer and a stacker attached. Trying to figure out if my bk 024...
I've seen this happen to a ton of the MP301s. They were cheap when making the hinge slot thing. I don't know that I'd accuse them of manhandling the printer. When I worked for Ricoh, I would keep a...
Woo that's quite a sticker! badass backpack though.
I had this same issue and I dropped the temp 5-10 degrees (can't remember exactly) and it still fused really well and I haven't had the error reoccur in a year and around if not more than 100k.
...
Tried that quite a few times unfortunately
Sent from my SM-G950U using Tapatalk
Pretty much!
Sent from my SM-G950U using Tapatalk
So it looks like when the end user updated the firmware, they ceased up the formatter. According to the tech support guy I was speaking with, he has gotten tons of calls about that this week....
It was ftp, thanks for the response!
Sent from my SM-G950U using Tapatalk
Hello! I have an issue with an HP M5035 with firmware version 48.430.1. End user updated to windows server 2016. All HP's started throwing 49.ff03 errors. I instructed IT to update firmware (red tape...
We replace drums and developer constantly, error f2-66 is very frequent on this mx4141n. The issue is very bad generic toner being added but im not allowed to say anything and im told to just make it...
You are better off with high temp grease, but regular white grease will do the trick. Keep an eye out for the plates that the lamp screws into as the might fall out one the lamp is out. It's pretty...
I bet it is cause the driver is on the network. I went there cause of a fusing error and i dont want to go down the rabbit hole so to speak, i just thought it was really odd. Oh well. If it ain't...
But i was printing from the machine itself, can you load the driver straight onto the machine? Thats why i found it to be so weird
Sent from my LG-LS777 using Tapatalk
Does anyone recognise this error? I got it while trying to print a demo sheet on a CM6040f MFP. it isnt causing any issues, im just curious is all....
I have coated all the sensors and checked the guides for obstruction. I will double check the gear! Thanks!
Sent from my LG-LS777 using Tapatalk
It's a few different codes, here is the first page of the smc also
Thanks!37461
HA just realized that attachment didn't save. my bad, J004 is the code.
It's right in between the exit rollers, I did not notice if the blue guide was broken but it didnt appear to be. That is, it lifts and closes during jam removal without feeling wonky and visually I...
https://www.youtube.com/watch?v=ZZ024W0ly8o
^^^^ video of what it's doing.^^^^
J004 misfeed
I checked the one way bearings in the doc feed. New feed belt but I dont think that has anything...
I would like insight on this as well. Im learning now but it would be nice to know.
Sent from my LG-LS777 using Tapatalk
Looks like transfer belt guides if everything is to spec. Might be grasping at straws, but maybe the voltage supply is out of place?
Sent from my LG-LS777 using Tapatalk