Thanks for the speedy reply! It is indeed Chex, but they're, like, whole. Not chewed on at all. It's weird. Maybe the previous owner's repair guy had a grudge? As for the wiring, it's definitely...
Type: Posts; User: Fayez Butts
Thanks for the speedy reply! It is indeed Chex, but they're, like, whole. Not chewed on at all. It's weird. Maybe the previous owner's repair guy had a grudge? As for the wiring, it's definitely...
Um, saga's not over yet actually guys. Is this normal?
http://i.imgur.com/qV7QbkSl.jpg
What about this? Hasn't happened to me before, the whole panel just went dark and the machine is...
Little update for you guys sitting on the edge of your seats - It's fixed! It was a timing issue. The P Disk was off timed by about 180 degrees, and I think it was a bad drum that got stuck.
Copies are at 2,775,628. Mylar guide looks alright, not crumpled or ripped. I hit that in-feed area with some compressed air and some dust came out but honestly I couldn't really see much, or even...
Looks great! And now I've really got hope for some of the gnarlier drums I've bought off ebay
Thank You! Your second idea definitely jived with what I expected and helped me figure some stuff out. Unfortunately it looks like the wiring and solenoid are working fine; the lever actuates...
You can clear error messages by holding down All Reset while turning on the machine.
Thank you!
Your second guess was pretty much something like what I expected may be happening, so that was helpful to go through those steps. Unfortunately it looks like the wiring is fine. The...
Hey guys, I feel like this has to be a setting turned on somewhere that I'm missing or something. I haven't done much printing at all with this machine, but a friend was having trouble, tried to fix...