I found the solution. That was a very Hard problem to solve. In the power supply, near to principal wire connector, the machine has a fan. The power supply that I had and another one doesn't have it....
Type: Posts; User: hypocresi01
I found the solution. That was a very Hard problem to solve. In the power supply, near to principal wire connector, the machine has a fan. The power supply that I had and another one doesn't have it....
Yes, I agree. The tube fan is a black tube, there is on power supply. But i dont now how this fail. The duct is not blocked. Near of black pump is a little sensor with a screw, is that the sensor of...
Hello,
I tried everything. I remmit to service manual, says something about third fan, I unmount it, interchange it, and nothing. I tested all fans, everyone turn on and sounds when turn on, I...
hello my friend. any way to "convert" a 5502 to 5502A, I want to use single pass in a 5502, but i dont know if it is possible.
Hello, I solved it with 143 clear and 5846 as said the post. But i tried before the NVram method, With 5824 i Uploadd the nvram file at sdcard slot 2, from a copier that has admin and password that i...
Great, that works for me. I couldnt in on special service mode, but, I tried with yellow 1 4 3 and stop once, and thend hold. thanks my friend.:cool:
Hello, I have the same problem with a MP4001, but when I try to do: clear modes, 1 4 3 clear stop, I cant in to special sp mode. am I doing something wrong? Thanks.
Good day, you are right. I had the same problem recently, but, I didnt find the answer that you said me. With this post, maybe that response is more visible to others. Anyway the exact solution is...
Hello, I dont know if this comment is too late, but, I solved this problem via telnet conection.
First, you need activate telnet on the PC that you use to access to ricoh machine.
After, you...