Check paper tray size selectors. They crack and can throw off paper size intermittently
Type: Posts; User: OMG
Check paper tray size selectors. They crack and can throw off paper size intermittently
Do they jam when you duplex running Paper Path Test in Diagnostics?
Printhead tilt error. Printhead not moving from back to front like it should. The common causes are a broken head tilt gear, wax spilt in machine and got on printhead shaft block and hardened so now...
In the Troubleshooting Menu you can turn on Jet Substitution to improve print quality since you have some missing jets.
Aftermarket toner probably killed the black and cyan drum units.
You'll have to replace the aftermarket toner and both imaging units.
You don't need any special tools. Just the correct size torque wrench
Here's a video. Different model but basically the same procedure.
YouTube
Using a hair dryer ain't gonna fix it.
I would move them to a different power outlet just to rule that out.
We had a issue where the customer was getting the 13.B9 error code. It turned out to be the Cartridge World rebuilt cartridges...
Xerox 8570, 8870, 8580, 8880, 8700, 8900 Drum Wiper Blade Removal
I work on lots of these. They're my albatross . Xerox told me that the life yield is 600K. I have one customer who has numerous of them with over 1 million pages.
When they start breaking they...
http://www.office.xerox.com/support/dctips/dc09cc0452.pdf
Make sure you reseated laser scanners properly. I've put them back in incorrectly before and had this same issue.
Machine will not feed through the ADF. Replaced feed roller and pad with no success. HP replaced the ADF a year ago under warranty for the same reason.
Any ideas?
Thanks
Paper starts to skew after it has fed roughly 40 inches of paper. Customer says they tried resolving issue with HP while machine was under warranty but never got it resolved.
Any ideas of what to...
Machine is installed on network and I'm able to print to it but it will not communicate when I type the IP address in the browser address.
Have tried a different formatter. Factory reset....
Wants to keep track of copying and printing usage per customer so they can charge for it.
Will the M680 do this and what is it called?
Sounds like it has a POS error.
No parts available.
Is it plugged directly to the wall?
Is it plugged in directly to the wall?
Possibly try a different power outlet.
Aftermarket ink?
From Xerox
If a PEK (Product Enablement Key) is left in the machine for an extended period of time, the machine will display the message but the machine now needs a MSOK (Master System Option...
Bad reversing assy.
I'd try a different transfer roller. We've started noticing bad transfer rollers in aftermarket maintenance kits.
Is the machine plugged directly into the wall? It could be a power issue if they...
Not sure if you can enable it ( Don't think you can)
I set the machines up to do the overwrite once a week usually at midnight when no one is using the machine.
Did you try a different toner cartridge?