already test the blend cartridges slots and all ok
Type: Posts; User: pLatik
already test the blend cartridges slots and all ok
Thanks for your reply. all new toners. the only thing that i already made is update the firmware and clear r-con. i will test your sugestion of bend cartridge slots.
could anyone help me understand what is happening with this? brand new toner´s OEM. A clue to start?
58259
i have sp manual and last firmware. not free. pm if you want
Like i said, the mechanical part is the next thing i will investigate, but i m convict this was a software error, or bad configuration. Like a Collegue said the change of the configuration of energy...
this solution presented, was the one I was now testing, because of the tips that had already been given because of the problem happening in energy saving mode. I'm going to check, because I think...
i upload a photo to all see that is in power on (recovery from sleep mode) that the jam occurs
and like i said, is not an issue wich happens all the time. the same document it is possible to print well in several prints (fetching a4 paper from the first drawer) and sporadically you will...
The jam code is "000a02". the source of the paper is the second drawer, even though it is selected in the driver that the paper source is the first drawer and selected a4 as source and destination in...
I Will trie your suggestion. I remove the pick up assy, from the second drawer and post results later. I was convict that the problem are from software, but now i m going to the hardware side. Thanks
Drawer 2 has no problem. if a4 sheets are inserted, or even a3 print is ordered, the machine prints correctly. what is happening is that if I send a4 prints, even though I specify that I want it to...
Print, only
Yes, i'm a trained Canon tech. The prints i made is in a4. I have a printer in the Shop and myself test some prints and this issue happen randomly when prints are made in a4 size. Even if I choose...
I have 5 canon c2220i machines with the same problem. customers who have a3 paper in the second drawer, the machine randomly and from time to time, even selecting the 1st drawer that has a4 paper, it...
I was preparing the machine to deliver to client. The error came after some minutes. It's never plugged to network
Sorry for the bad introduction of the problem.
I'm totally aware of the recent's problems with this model's and the SC 899.
Firmware issues or bad controllers. My equipment is not plugged to any...
hello,
can anyone send me the firmware to ricoh mpc 3001 to try to repair the error sc899? i have all manuals of canon to exchange if anyone has interest
thanks in advance
i have 2 or 3 machines yet in the field, and firmware´s always come handy.
if you could, i will appreciate
thanks for the reply. clients do not use 3rd party firewall. they all use windows defender firewall and like i said i turn off outbound/inbound traffic for the private network to see if is an...
Hi,
This machine´s have the latest firmware v.48.01. in previous fimware ( 47.70.01) the concerns with smbv1 was overcome, and the machine supports now smbv2/smbv3.
all the machines i have in...
hi,
this machine is not printing the color yellow. i check with noozle check and the yellow is not there. what do you think it can be? the print head?
i have a taskalfa 5500i with the exact same problem. i want to order new main pwb, but i have doubts with the part number of the main.
is this the correct part number: 302LH94150?
thanks in advance
this machine have a old firmware. i will update and try the other sugestions. i order a new black drum and i came back later to show the results here
in this machine i put 2 ITB units and they go out very quickly as the belt doesnt clean and backs up not putting waste toner in the wasted toner container.
Ive checked the chute between ITB and...