I checked printer controller is not installed .can I scan to pc without printer controller
Type: Posts; User: Zahid khan
I checked printer controller is not installed .can I scan to pc without printer controller
here are the screen shots
I tried that but no luck
I have connected bizhub 600 directly with pic via Ethernet cable.i put the IP address in browser but nothing happens.to find the ip of bizhub I go to utility...administrator setting....network...
Yes from glass it is ok
When I copy 11x 13 page from adf only A4 size is printed
The print is bleeding and the corner of every printed dark image is missing
My Xerox wc 5765 print quality is at the top of every page.half line at the top of every page is mising.and top of every shady image is mising
I have Xerox wc5765. The first line of every printed page is missing.
I have given the picture of tray 3 and 4 transport motor assembly of Xerox 5765 .how to put it in machine.
did I lost any part of it .please see the picture
The print is here
I have Xerox wc5765.when I print something the top of ever line of print has missing toner.
I have Xerox wc 5765 when I scan page from adf in auto color mode the there is black line in the middle of page scanned.in other modes this line does not appear.
I can print on Xerox wc5765 using cross cable .but can not go to centreware web using ip address
Does Minolta 7272 has printer controller in it or u have to buy it separately
The feed gates are stuck .i think the should move back and forth
i am installing the same software already installed in machine.the machine does not copy only print.the scan copy on upper bar does not appear when I go to copy menu.it only beeps.
i used 4 different pendrives
I copy this folder into sub and insert into Xerox sub port but altboot not work
I have replaced it but now I got 05-521. 05-522. 05-525. Codes , What should I do with them .and also the machine now can't copy only print...adjustment in progress message shows
Xerox wc5765 dadh feed roller are melted. Do I have to replace the whole part are only the rollers
Tray 3 elevator motor not working can I use tray 4 elevator mor on tray 3
Tray 3 is out of service code 07-543-00
After five prints I got the error report on page " Pcl XL error." Illiberal tag.xerox 5765
Bundle of thanks