hey everyone,
I had this problem a bunch on a 1055 which is a newer 551. Ricoh has a bulletin that says to shake the toner bottle before installing. The toner packs in the bottom of the bottle and...
Type: Posts; User: galexander37
hey everyone,
I had this problem a bunch on a 1055 which is a newer 551. Ricoh has a bulletin that says to shake the toner bottle before installing. The toner packs in the bottom of the bottle and...
We Had This Try The Power Supply.
:confused::confused::confused::confused:
Could be a problem with the duplex. The paper is not reaching the reg. roller in time. Check or replace the duplex clutches, tray 1 clutches, the reg. mylars behind the B2 door and the relay clutch...
I agree. I had that problem. :)
Glad to help:)
The way to enter service mode is hit clear modes then 107 then hold down the stop key for five seconds then you are in .Power off and back on using the red toggle switch on the side.
agree
Try the bias board and the drum might be worn down to the metal and causing an arch to the dev unit.;)
dangerous
Do any of you guys have a production goal? Our techs have to do 4.5 calls per day in order to qualify for a bonus.:eek:
That is what we thought but after a few months the machines were not getting the proper parts. Good Luck:D
:p Hey jcirafic,
The 9040 had liquid toner in the units and fuser oil in the fuser. When it mixed we had a blue mixture that leaked on the duplex.:eek: The 5030 and it's brothers was the first...
:p I am a manager now and my bonus stinks. When I was on the system I also did pretty good. The guys that work on big machines make the best money. I work on Ricoh 55 cpm and higher but no color....
SAVIN LIQUID MACHINES ALL WERE PIGS. DO YOU TECHS REMEMBER THE 9040i? THAT WAS SAVIN'S LAST STAND AND IT SUCKED.
How about the guys that do not put in any parts and get big money. That part of the program stinks. The good guys have to go and do the work that should have been done and do not get the money.