When dealing with C970, I often check the main charger unit, check any burn mark on the front & rear terminal, sometime the charger rod cleaner also will cause charging issue, where u can try to...
Type: Posts; User: toshibaestudio
When dealing with C970, I often check the main charger unit, check any burn mark on the front & rear terminal, sometime the charger rod cleaner also will cause charging issue, where u can try to...
42870
Registration clutch is one of the common problem on this series, when print many pages, the images will shift resulting jam.
For OSX 10.14 built in apps, the text box to enter dept code is missing, u can create a preset that store the dept code using other app such as chrome. Make sure the dept code is enabled under...
How to justify the tray up motor is working without any output test?
If insert drawer and tray did not lift up and cannot hear any motor noise, most probably the motor problem...
Is very common...
ASD region Toshiba estudio MFPs firmwares/manuals/part list available and can be downloaded via google drive link.
Email toshibaestudio2016@gmail.com to know more TQ.
Did u check the feeder unit rollers? Feeder unit?
Frankly speaking, I never change below 05 codes...
05-448 Default value for short size is 16
05-450 Default value for short size is 20
Toshiba estudio MFPs firmwares/manuals/part list/parts available for sale.
*ASD region
Email toshibaestudio2016@gmail.com to know more TQ.
Toshiba estudio MFPs firmwares/manuals/part list available and can be downloaded via google drive link.
Email toshibaestudio2016@gmail.com to know more TQ.
ASD region Toshiba estudio MFPs firmwares/manuals/part list available and can be downloaded via google drive link.
Email toshibaestudio2016@gmail.com to know more TQ.
ASD region Toshiba estudio MFPs firmwares/manuals/part list available and can be downloaded via google drive link.
K2 e2500c/3500c/4500c T380SY0356
Email toshibaestudio2016@gmail.com to know...
This problem happen since e600 series...Check & service toner drive...And drum unit as well especially main charger...
The paper jam/stop at drum unit cannot go up? Probably the main drive drum shaft pin broken...
Yes, ASD region firmwares available, do email me toshibaestudio2016@gmail.com TQ.
Once u enable paper attribute to the drawer, it will no longer work automatically/default, need manual select the drawer to work when copy or print...
Make sure genuine toner is used...
I have cases where genuine toner more than 70% also showing "Install New Cartridge" error.
When dealing with toner issue, I always perform below steps:
1....
There is HDD Check Tool for eBX2 models to check if the HDD needs to be replaced.
Supported models:
e-STUDIO 5055C Series
e-STUDIO2550C Series HDD model
e-STUDIO 507 Series
e-STUDIO 407CS...
Is there any error code on the print log, most probably the printer kit dongle faulty...
Toshiba service manuals, service part lists, ASD firmwares, genuine parts, can look for me, TQ.
email: toshibaestudio2016@gmail.com
What blackcat mentioned is the best practice...
When printer ip address is in static mode, the ip address must reserved for the printer, otherwise if 2 same ip address is used, u will have...
Reuss2 E2018A, E3018A, E2518A, E3518A, E4518A, E5018A TG01ALL0W1201 [L6.14]
[Update : February 13, 2019] e-BRIDGE N Series: Version Upgrade of System F/W (Tx01HD0W1201) [L6.14] *EBN2 series
...
If MFP came with normal HDD, can change to ADI WIPE HDD...
But if ADI WIPE HDD, cannot change to normal HDD...
When the strap is broken, the broken strap attached to the transfer unit (ADU unit) need to be remove, otherwise it will cause image skew, paper jam as mentioned by Mr. Cat.
There are many clutches in the feeding components...
Is it latest EBN2 e-STUDIO2515ac/3015ac/3515ac/4515ac/5015ac?
So far only EBN and EBN2 series require password...Some no need password just press OK, if cannot can try #1048#