Thanks:)
Type: Posts; User: liondor1969
Thanks:)
Hi wen i start the printer,after 5 min apeare this code C-5403 BLACK SCREAN ..all is down
Please help my with a solution
Thanks
Please if is possible too use anther brand toner for my KONICA 2060L.. if same recommendations tested too work ok with this printer.
Is difficult too buy genuine tonner from konica..if is a person...
Problem resove is..too change the cilinder,i put new on,naw all work ok..cilinder black cause this problem..
Thanks for your help !
i is that problem..developer unit loks ok for my ye:D i tray to reset contor..firsth
ok,thanks..i must ceck contor..becouse i change this but forghet too reset contor
Thanks
hallo
on my 2060L i have this error C2814...i tray too clean the sensor from inside left side wen is open ... i cleean all but after this wen the machine made autoajustment..wen made this..apeare...
Hy..haw to made a color test drum on service mode..i dont know the code to made this too see wat cilinder drum is with problem..i have a line color
thanks
Hallo,please help my to enter in service meniu to ceck parts usage..thanks
I do not want to do experiments, I wonder if anyone has done this and if black toner is compatible ;)at 6500 I reloaded toner from c8000 and I worked a few years with him without any problems.
Tx
Hallo
i buy today a used bizhub 283..only black,is posible too use black color toner from c8000 to refil my bizhub 283 ? I have in studio a new Acurio Print C2060L..is posible to refil bizhub...
Thanks..i buy this is new printer with full service from konica fot 3 yar..i need this cod only for ceck kontor parts.. :-) i not need this for made service..
Thanks
...
Please help my with code service mode to AccurioPress C2060..haw to enter in service mode..is possible to fined as service boock for this printer ??
Thanks
I change output sezor..naw is ok..
Tx
QUOTE=raplma;593059]Hello
What I'm going to do is to describe our scenario and what we did to overcome it. From the information you give it is difficult...
Hallo
Please help my with a solution for this jamm I checked all the sensors,dust removed the output sensor,I changed the sensor with acutuador. I do not know what to do next,the paper is stuck at...
Hallo
I have a problem ERROR J3201 on my C6500..please help my
Thanks
ok..i resolve this ..i cleen senzor fom back cilinder blak unit,al is ok naw..
Hallo
i have this problem on my C6500..please help my with this
thanks
Hallo
Thanks i send you same files to test on yor C6500,on mine i have same red contur on schadow..
Thanks to your help
Thanks impimp329 i must test,wen i see in Photoshop all is ok,with no color cast..
Perfect...THANKS
Thanks..but is not for free :-)
Hallo
If is possible to help my with a bock part list for C6500,a pdf file if is possible.
Thanks
thanks,but i recive this job to print,all is jpg..my workflow is..i print from photoshop,adobe rgb i send to print to fiery..in fiery is set adobe rgb.. i test all profile from my fiery