Search:

Good morning,
I guess you tried swapping coronas and checked for clean corona contacts etc...
Whats the measurement in between the lines on your sample?
I agree with psyco, humidity can cause...

I am copy-pasting the thread I opened 3 days ago on fiery forums, just in case you guys have any ideas or you came across this issue before:

It appears that the problem affects all MacOS computers...

My best bet is transfer voltage problem.
I am not familiar with the printer, but if your image on drums are ok next thing to check is image on belt.
If that is ok too then probably it's a bad...

Windows or Mac environment?
file type (raster, vector) that your client "see wrong", RGB or CMYK, if CMYK what profile it was worked with (swop, ISO, fogra etc)?
i believe there's not much you can...

Was about to do that... This forum (since 2015 that i discovered it) helped me solving lots of weird problems in my field...

Yes, in fact it's the IC-305 server, the stand alone with FACI option installed.
IC-303 as far as I remember is the bolt-on bustled server, which is not my case.

Hi guys!

Any chance to get my hands on these magic ISOs?
Unhappy c6501, stuck with system 3.0
Thanks in advance!

Greetings from Greece guys,
very nice and resourceful forum!