Search:

So no auto duplex from a bypass :///

Is it possible to use duplex printing while I am using thick 2-3-4 from bypass ?

Working fine while in a tray, but as soon as loaded to bypass, set to it (paper set 2nd side or something like...

I have received this machine recently. Of course folding was a little off (is there any mechanical screw or something to adjust it ?), so I have used finisher adjustment and now it is folding as it...

I have found it.

Thanks.

There is a HDD and seems that suddenly it starts working (however I had to enable it from service mode).

It is missing, If it is visible right after steel cover is removed.

I guess I have to find a caddy and hdd

Thanks.

I've tried service mode, but looks like it is not there.

I have also removed all back cover (plastic and top steel) to see if there is a hard drive, but I cannot find it :confused:

I...

C451 arrived, everything seems to be working fine (great print quality, much better than my business cards quality, other laser printers or inkjets).

However there is missing user box, so I guess...

I know that spec states max 20 80gsm, 15 90gsm.

As it can fold and staple 200gsm cover, it seems like it is not a technical limitation of the finisher but more recommended maximum number of...

Thank you habik for detailed explanation.

This project will start on the begging of the July :), hopefully everything will survive.

Thanks for detailed explanation !

Now I just worry about fuser / transfer belt. How to secure them for a short trip. Can I just put some A3 papers on the pass area and some bubble wrap ?

I...

I've hoped that body can be disassembled into smaller pieces (paper tray containers looks like a part attached to a main body) like 30-40kg each which easily I could transport (I was transporting on...

Thanks for quick respond.

Do you think that I could go to 50-60kg on main unit ? How should I pack drums/fuser, etc. so it would be secure for a transport ?

Is it possible to remove all those...

As photocopier has to be transported on the 3rd floor, I have to figure out a way to transport it on my own stair climber (manual) (couriers here seems to be not able to help as they do not have a...