Search:

Type: Posts; User: driving lots of miles

Page 1 of 15 1 2 3 4

Search: Search took 0.02 seconds; generated 19 minute(s) ago.

  1. Re: MX-5141 with Humidity sensor code.

    On this old of a machine I have just swapped doors from another machine in our bonepile.
  2. Re: Mx-3050n randomly does not reach the requested number of copy

    I would agree with the Hard drive or the M-Sata as the place to start.
  3. [Misc] Re: Sharp MX 453 When you do a 2 to 2 or 2 to 1 duplex it get stuck in job status

    Have you checked the SD card?
  4. Re: Sharp BP-70C55 Thin blue line on 2 sided copys and scans

    It has been a week and a half now with no blue lines. I found a blue gel pen next to the copier on a worktable and did training with the person who seemed to be in charge of the copier. She was...
  5. Sharp BP-70C55 Thin blue line on 2 sided copys and scans

    I have been to this machine twice now Sharp BP-70C55 That is leaving a thin blue line when they do a two sided scan or copy. I have cleaned the upper slit glass and it goes away. Single sided...
  6. Re: Brother MFC-L2730DW Touchscreen Black, Power Light On, Firmware Re-Patch Not Work

    We had another non working machine we pulled the board out of.
  7. Re: Brother MFC-L2730DW Touchscreen Black, Power Light On, Firmware Re-Patch Not Work

    We had a 9310 that had the power interrupted during the update and we ended up replacing the Main PCB
  8. Re: color usage on Sharp color machines

    I had been looking all over for this info in the service manual and elsewhere but couldn't find it. Even on the copier screen it does not this as an option. Thanks again.
  9. Re: color usage on Sharp color machines

    Thank you that was the information I was looking for.
  10. color usage on Sharp color machines

    Our shop had a color pricing formula they used to determine the amount of color used on a copied or printed color page and would charge the customer based on a formula they set up for the price of...
  11. Replies
    17
    Views
    1,727

    Re: BP70C55

    My costs show 200.00 less to rebuild which includes one hour of labor. My main concern with these fusers is that the fuser belt wanders off to the side destroying themselves. Even on the brand new...
  12. Replies
    17
    Views
    1,727

    Re: BP70C55

    I found that in the latest parts book both fusers have the same part number for the complete fuser. However in the service manuals they are still showing different numbers? I have rebuilt one of...
  13. Replies
    3
    Views
    1,295

    Re: SHARP FIRMWARE

    I have not heard of contract toner for sharp in the US. Is this something new?
  14. Re: Request for Sharp CR5 and BCR5 Handy Guides

    I noticed that there were no handy guides starting with the 70 series.
  15. Re: DCP-8110DN Ghosting on whole page

    I would use a google search for a brother dealer in your area or go online to a site like (Precision Roller. In Stock for $289.95)
  16. Re: DCP-8110DN Ghosting on whole page

    When the rear door is open the printer thinks it is printing an envelope. Envelopes print at a hotter temperature and slower than plain paper thus the fuser is bonding the toner better so no...
  17. [Misc] Re: MX3071 finisher stapling off-center

    This will require a tech as there are no user options for this.
  18. Re: Brother MFC-L9570CDW interrupted firmware update

    I did try that but it did not find the 9570
    Thanks
  19. Re: Brother MFC-L9570CDW interrupted firmware update

    I did try that but it did not find the 9570
    Thanks
  20. Re: Sharp model names xx50 (V/N), xx70 (V/N), xx51, xx71

    The difference between the N/V models is the different circuit boards (I was told it was a supply problem)
    The others 0/1 were an upgrade with the 1 the later model, similar consumables but some...
  21. Re: Brother MFC-L9570CDW interrupted firmware update

    I did see that when I googled it and the problem is I don't have access to the screen
  22. Brother MFC-L9570CDW interrupted firmware update

    Customer brought in a Brother MFC-L9570CDW and started a firmware update and then turned it off in the middle of the update. Now only the power button light comes on and does nothing, no fans no...
  23. Replies
    14
    Views
    2,577

    Re: Sharp MX 3071 Setup

    My employer has mentioned to me that the exit cabinets are impossible to get. We have had several trade-ins but they all had the inner finishers.
  24. Re: Sharp Mx4071 slow to boot and run

    Final solution was the new msata card the SCN MFP PWB, and new HDD.
    We are returning the machine tomorrow.
  25. Re: Sharp Mx4071 slow to boot and run

    Unfortunately I have Numbers there. I installed a new HDD but it would not boot up. I cant do an end of lease at the moment as the password has been changed. I'm working on getting that.
Results 1 to 25 of 361
Page 1 of 15 1 2 3 4